![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834087.webp)
80
SCANS
1
2
3
4
5
6
7
9
10
12
13
14
15
16
17
18
19
20
21
11
8
8
D
Select Memory scan
Select Memory scan searches for signals through
Memory channels programmed as “Sel” (Select).
NOTE:
To start a Select Memory scan, two or more
Memory channels must be designated as Select
Memory channels.
q
Start a Memory scan.
• Follow steps
q
through
t
on the previous page.
w
While scanning, push [SEL](F-3) to switch the scan
function between a Memory scan and a Select
Memory scan.
• “SEL-MEMO SCAN” blinks while Select Memory scan
-
ning.
e
Push [MEM](F-1) to cancel the scan.
• Rotating [DIAL] also cancels the scan.
All Memory channels can be set as Select Memory
channels, except for the Scan Edge channels.
➥
When the “SCAN” screen is displayed, push [SEL]
(F-3), or when the “MEM” screen (Memory Menu)
is displayed, push [SEL](F-5) to set or cancel the
displayed Memory channel as a Select Memory
channel.
• “SEL” appears when the channel is set as a Select
Memory channel.
• An error beep sounds when the displayed Memory
channel is a blank channel.
• Holding down [SEL](F-3) or [SEL](F-5) for 1 second dis
-
plays “SEL ALL Clear?.” Hold down [YES](F-4) to clear
all Select Memory channel settings.
M E M
∂
F
SPAN
S E T
S E L
SCAN
MEMO SCAN
M E M
∂
F
SPAN
S E T
S E L
SCAN
SEL−MEMO SCAN
M E M
∂
F
SPAN
S E T
S E L
SCAN
∂
F
:
±
1 0 k
Appears
“SCAN” screen
“MEM” screen (Memory Menu)
While Select Memory scanning
D
Setting/Cancelling Select Memory channels
E D T
(
)
S E L
MEM
14.19500 USB