!7
NOISE BLANKER SWITCH [NB]
(p. 60)
➥
Push to turn the Noise Blanker ON or OFF. The
Noise Blanker reduces pulse-type noise such as
that generated by vehicle ignition systems. The
Noise Blanker cannot be used in the FM mode,
and is not effective for non-pulse-type noise.
• “NB” appears when the Noise Blanker is ON.
➥
Hold down for 1 second to display the “NB”
screen. Push to return to the previous screen
display.
!8
NOISE BLANKER LEVEL CONTROL [NB]
(outer control; p. 60)
Rotate to adjust the noise blanker threshold level
when the Noise Blanker is ON. Set for maximum
readability.
• To use this control, first push [NB] (
!7
).
Increases
Decreases
!9
NOISE REDUCTION LEVEL CONTROL [NR]
(inner control; p. 61)
Rotate to adjust the DSP noise reduction level
when the Noise Reduction is ON. Set for maximum
readability.
• To use this control, first push [NR] (
@0
).
Increases
Decreases
@0
NOISE REDUCTION SWITCH [NR]
(p. 61)
Push to turn DSP Noise Reduction ON or OFF.
• “NR” appears when Noise Reduction is ON.
@1
TX INDICATOR
Lights red while transmitting.
@2
FUNCTION SWITCHES [F1]–[F5]
(pp. 13, 14)
Push to select the function which is indicated on the
LCD display above each switch.
• The functions vary, depending on the selected menu
and the operating mode.
@3
MENU SWITCH [MENU]
(pp. 13, 14)
➥
Push to change the set of functions assigned to
switches ([F-1] to [F-5]).
• Toggles between the function menus, M1 (Menu 1)
and M2 (Menu 2).
➥
Hold down for 1 second to enter the Set mode.
Push to return to the previous screen display.
@4
MODE SWITCHES
Push to select your desired operating mode. (p. 31)
• The built-in speech synthesizer announces the selected
mode when the “SPEECH [MODE] SW” item is set to
“ON” in the Set mode. (p. 87)
[SSB]
➥
Push to alternately select the USB or LSB
modes.
• “USB” or “LSB” appears.
➥
In
the
SSB mode, hold down for 1 second to se-
lect
the
SSB data mode (USB-D, LSB-D).
• “
D
” appears in addition to “USB” or “LSB.”
➥
In the SSB data mode, push to return to the nor-
mal SSB mode.
[CW]
Push to alternately select
the
CW and CW-R
(CW
reverse)
modes.
• “CW” or “CW-R” appears.
■
Front panel (continued)
3
1
PANEL DESCRIPTION
@1
@5
@6
@7
@8
@9
#1
#0
#2
@0
!9 !8 !7
@4
@2
@3
