![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834030.webp)
[RF/SQL]
: 12 o’clock
[MIC]
: 12 o’clock
[NR]
: Max. CCW
[CW PITCH]
: 12 o’clock
[RF PWR]
: Max. CW
[AF]
: Max. CCW
■
Before first applying power
Before turning ON your transceiver for the first time,
make sure all connections required for your system
are complete by reviewing them in Section 2 of this
manual.
After all connections have been made, set controls
and switches as shown in the illustration below.
3
23
BASIC OPERATION
[POWER]
[M-CLR] [F-INP ENT]
■
Turning ON (CPU resetting)
First time to Power ON:
Reset the transceiver using the following procedure.
Resetting
CLEARS
all the programmed contents in
the memory channels, and returns all the pro-
grammed items in the Set mode to their default set-
tings.
q
Make sure the transceiver’s power is OFF.
w
While holding down both [F-INP ENT] and [M-CLR],
push [POWER] to turn ON the transceiver.
• The CPU is reset.
• The transceiver displays “ALL CLEAR,” then displayes
its initial VFO frequency when resetting is complete.
e
Change the Set mode settings
to
suit your operat-
ing needs. (p. 85)
Normal Power ON:
Push [POWER] to turn ON the transceiver.
Power OFF:
Hold down [POWER] for 1 second to turn OFF the
transceiver.
[NOTCH]
: 12 o’clock
CW
: Clockwise
CCW : Counterclockwise
[KEY SPEED]
: 10–12 o’clock
Ω
ALL CLEAR
≈
A G C
T B W
S C P
M1