85
SET MODE
10
■
Set mode description
The Set mode is used for programming infrequently
changed values or functions.
D
The Set mode settings
q
Hold down [MENU] for 1 second to enter the Set
mode.
w
Push [
Y
](F-1) or [
Z
](F-2) to select the desired
item.
e
Rotate [DIAL] to select the desired option.
• Hold down [F-3] for 1 second to reset to the default set
-
ting, if desired.
r
Push [MENU] to save, and exit the Set mode.
Select the item
Reset to the default
setting
[
∫
]
[MENU]
[F-3]
[DIAL]
[
√
]
[
√
]
Ù
1
Ú
5 0 %
SET
L C D C o n t r a s t
Displays the Set mode
item name and number
Displays the option
LCD Contrast
1.
(Default: 50%)
Adjust the LCD contrast to between 0% and 100% in
1% steps.
LCD Backlight
2.
(Default: 50%)
Adjust the LCD backlight brightness to between 0%
and 100% in 1% steps.
NOTE:
Regardless of this setting, the LCD backlight
brightness is maximum (100%) at power ON by de
-
sign. (It is not an equipment malfunction.) Then, the
brightness level automatically returns to the ad-
justed value.
Beep Level
3.
(Default: 50%)
Adjust the confirmation and band edge beep tones
output level to between 0% and 100% in 1% steps.
Beep Level Limit
4.
(Default: ON)
Turn the confirmation and band edge beep tones out-
put level limiting ON or OFF.
When you set this item to ON, the beep tones are ad-
justed by the [AF] control until rotating the [AF] control
reaches to the specified level. Further rotation will not
increase the volume of the beep tones.
• OFF : Beep level adjustment is not limited.
• ON : Beep level adjustment is limited with the [AF]
control.
Beep
5.
(Default: ON)
Turn the confirmation beep ON or OFF.
Set the beep output level in the “Beep Level” item, as
described to the left.
• OFF : The confirmation beep is OFF. (Silent opera
-
tion)
• ON : The confirmation beep sounds each time a
switch is pushed.
Band Edge Beep
6.
(Default: ON(Default))
When you tune into or out of an amateur band’s fre-
quency range, you can hear a beep tone.
If you select “ON (User)” or “ON (User) & TX,” you can
program a total of 30 band edge frequencies in the
“User band Edge” item.
You can set the beep output level in the “Beep Level”
item as described to the left.
• OFF
: Band edge beep is OFF
• ON (Default)
: When you tune into or out of the
default amateur band’s frequency
range, a beep sounds.
• ON (User)
: When you tune into or out of a user
programmed amateur band’s fre-
quency range, a beep sounds.
• ON (User) & TX : When you tune into or out of a user
programmed amateur band’s fre-
quency range, a beep sounds.
In addition, transmission is inhibited
outside the programmed range.
