![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834018.webp)
11
1
PANEL DESCRIPTION
■
LCD display
q
POWER DOWN TRANSMISSION ICON
(p. 98)
Appears when the output power is decreased by
the Reduced Power Transmission function.
w
TX ICON
Indicates the transmit frequency is displayed.
➥
“
” appears while the operating frequency is in
an amateur band.
➥
“
” appears while the operating frequency
is not in an amateur band. However, when the
“Band Edge Beep” item is set to “OFF” in the Set
mode (p. 85), “
” does not appear.
e
RX ICON
Indicates the receive frequency is displayed.
r
FREQUENCY READOUT
➥
Displays the operating frequency.
• When the quick tuning icon “
” is displayed, the fre-
quency changes in kHz quick tuning steps. (p. 27)
• When the quick tuning icon “
” is not displayed, the
frequency changes in 10 Hz or 1 Hz steps.
➥
When the Split function is ON, displays the re-
ceive frequency (VFO A or VFO B). (p. 66)
t
MULTI-FUNCTION METER INDICATION
➥
Displays the signal strength while receiving.
➥
Displays the relative output power, ALC and
SWR or compression levels while transmitting.
(p. 33)
➥
When the Meter Peak Hold function is ON, the
peak level of a received signal strength or the
output power is displayed for approximately 0.5
seconds. (p. 60)
y
VOX ICON
(p. 62)
Appears when the VOX function is ON.
u
SPEECH COMPRESSOR ICON
(p. 64)
Appears when the Speech Compressor function is
ON.
i
FUNCTION DISPLAY
(pp. 13, 14)
Shows the function of the function switches ([F-1] to
[F-5]), Set mode items and IF passband width.
o
VOICE SQUELCH CONTROL ICON
(p. 76)
Appears when the VSC (Voice Squelch Control)
function is ON.
!0
TONE SQUELCH ICONS
(Mode: FM)
➥
“TONE” appears when the Repeater Tone func-
tion is ON. (p. 52)
➥
“TSQL” appears when the Tone Squelch function
is ON. (p. 50)
!1
SPLIT READOUT
(pp. 66, 67)
When the Split function is ON, displays the transmit
frequency (VFO A or VFO B).
!2
MEMORY CHANNEL READOUT
(p. 69)
Displays the selected memory channel.
!3
SELECT MEMORY CHANNEL ICON
(p. 80)
Appears when the selected memory channel is set
as a select memory channel.
!4
BLANK MEMORY ICON
(pp. 69, 71)
Appears when the selected memory channel is
blank.
!5
1
⁄
4
TUNING DIAL SPEED ICON
(p. 27)
(Mode: SSB-D/CW/RTTY)
Appears when the tuning dial speed is set so that
one rotation is equal to
1
⁄
4
of the normal rotation.
r
t
i
y
q
w
e
u
o
!3
!4
!0
!1
!2
!5