![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834077.webp)
70
MEMORY OPERATION
1
2
3
4
5
6
8
9
11
12
13
14
15
16
17
18
19
20
21
7
10
7
Memory channels can be programmed in either the
VFO mode or the Memory mode.
D
Programming in the VFO mode
q
Push [VFO/MEMO] to select the VFO mode.
w
Set the frequency, operating mode, and other data
into both VFO A and VFO B.
e
Push [
Y
] or [
Z
] to select a Memory channel num-
ber to be programmed.
• “
” appears if the selected Memory channel is a
blank channel.
r
Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
• Three beeps sound when the
memory programming is
complete.
D
Programming in the Memory mode
q
Push [VFO/MEMO] to select the Memory mode.
w
Push [
Y
] or [
Z
] to select a Memory channel to be
programmed.
• The contents of the Memory channel appear in the dis
-
play.
• “
” appears if the selected Memory channel is a
blank channel.
e
Enter the frequency, operating mode, and other
data into the Memory channel.
r
Hold down [MW] for 1 second to program the con-
tents into the Memory channel.
• Three beeps sound when the memory programming is
complete.
NOTE:
If you perform the above operations in a pre-
programmed channel, the previous channel data will
be overwritten.
■
Memory channel programming
[EXAMPLE]:
Programming 7.088 MHz/LSB into the Mem-
ory channel 12 while in the VFO mode.
[EXAMPLE]:
Programming 21.280 MHz/USB into Memory
channel 18 while in the Memory mode.
[VFO/MEMO] [MW]
[
∫
]
[
√
]
A G C
T B W
S C P
M1
A G C
T B W
S C P
M1