![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834028.webp)
21
2
INSTALLATION AND CONNECTIONS
■
Linear amplifier connections (Continued)
D
Connecting a non-Icom linear amplifier
R
WARNING!
• Set the transceiver output power and linear amplifier ALC output level after referring to the linear amplifier in
-
struction manual.
• The ALC input level must be in the range 0 V to –3 V. The transceiver does not accept a positive voltage. Non-
matched ALC and RF power settings could overheat or damage the linear amplifier.
• The IC-7410 SEND terminal (ACC connector pin 3) is rated at 16 V/0.5 A DC. If this value is exceeded, a larger
external relay must be used.
50
ø
coaxial cable
To an antenna
Non-Icom linear
amplifier
RF OUTPUT
Transceiver
[GND]
[ALC]
GND
[ANT1]
ALC
SEND
[SEND]
RF INPUT
Ground