![background image](http://html1.mh-extra.com/html/icom/ic-i7410/ic-i7410_instruction-manual_4297834072.webp)
65
6
FUNCTIONS FOR TRANSMIT
■
∂
TX function
The
∂
TX function shifts the transmit frequency up to
±9.99 kHz in 10 Hz steps* without changing the re-
ceive frequency.
* The [RIT/
∂
TX] control tunes in 1 Hz steps when the operat-
ing frequency readout is set to the 1 Hz step option.
q
Push [
∂
TX] to turn ON the
∂
TX function.
• “
∂
TX” and the frequency shift appear.
w
Rotate the [RIT/
∂
TX] control.
e
To reset the
∂
TX frequency, hold down [CLEAR]
for 1 second.
• Push [CLEAR] momentarily to reset the
∂
TX frequency
when the “Quick RIT Clear” item is set to “ON” in the
Set mode. (p. 88)
r
To cancel the
∂
TX function, push [
∂
TX] again.
• “
∂
TX” and the frequency shift disappear.
When the RIT and
∂
TX functions are ON at the
same time, the [RIT/
∂
TX] control shifts both the
transmit and receive frequencies from the displayed
frequency at the same time.
✔
For your convenience— Calculate function
The frequency shift of the
∂
TX function can be added
to or subtracted from the displayed frequency.
➥
While displaying the
∂
TX frequency shift, hold
down [
∂
TX] for 1 second.
D
∂
TX Monitor function
When the
∂
TX function is ON, holding down [XFC]
allows you to directly monitor the transmit frequency
(including the
∂
TX frequency offset).
■
Monitor function
The Monitor function allows you to listen to your trans-
mit IF signals in any mode. Use this to check voice
characteristics while adjusting transmit parameters.
(pp. 90, 91)
The CW sidetone functions regardless of the [MONI-
TOR] setting.
q
Push [MONITOR] to turn ON the Monitor function.
• “MONI” appears.
w
Rotate the [MONI GAIN] control to adjust the moni-
tor level.
• F
or the clearest audio output, adjust while holding
down [PTT] and speaking into the microphone.
e
Push [MONITOR] again to turn OFF the function.
• “MONI” disappears.
[
∂
TX] [RIT/
∂
TX]
[CLEAR]
Appear
[XFC]
A G C
T B W
S C P
M1
[MONITOR]
[MONI GAIN]
A G C
T B W
S C P
M1
Appears