8-19
BASIC MANUAL
SET MODE
8
8
» SET >
Display
RX Position Display Timer
(Default: 10sec)
Sets the RX position data’s time period to display in a
dialog.
• 5/10/15/30sec: Displays the caller’s position for this
set period of time.
• Hold:
Displays the caller’s position until
you operate the transceiver.
Reply Position Display
(Default: ON)
Selects whether or not to display the caller’s position
when it is included in the Auto Replay signal.
•
OFF: Does not display the caller’s position.
• ON: Automatically displays the caller’s position.
RX Picture Indicator
(Default: ON)
Selects whether or not to display the RX Picture
Indicator when a picture is included in the received
signal.
•
OFF: No indicator is displayed, even if a picture is
included in the received signal.
• ON: The indicator is displayed when a picture is
included in the received signal.
L
When “RX Call Sign Display” is set to “OFF,” the indicator
is not displayed, even if a picture is included in the
received signal.
DV RX Backlight
(Default: ON)
Turns the DV RX Backlight function ON or OFF.
In the DV mode, this function turns ON the screen
while displaying the calling station’s call sign or a
received message.
•
OFF: The function is OFF.
• ON: The screen automatically turns ON when
displaying the calling station’s call sign or
a received message. The screen stays ON
while the call sign or message is scrolling.
TX Call Sign Display
(Default: Your Call Sign)
Selects whether or not to display My or Your call sign
while transmitting.
•
OFF:
Turns OFF the function.
• Your Call Sign: Displays and scrolls the call sign of
the target station.
• My Call Sign: Displays and scrolls your own call
sign.
L
When “Your Call Sign” is selected, and if the call sign and
name of the caller station is programmed in your memory,
the programmed name is displayed after the call sign.
Scroll Speed
(Default: Fast)
Sets the scrolling speed of the message, call sign,
or other text, that are displayed on the controller’s
display to “Slow” or “Fast.”
Opening Message
(Default: ON)
Selects whether or not to display the opening
message at power ON.
Power ON Check
(Default: ON)
Selects whether or not to display the RF Power level
and the power source voltage at power ON.
L
When the external DC power source voltage is above
15.6V, “HI Voltage” is displayed.
» SET > Display >
Display Unit
Latitude/Longitude
(Default: dddº mm.mm′)
Selects the format to display the latitude and the
longitude.
Altitude/Distance
(Default: ft/mi)
L
The default value may differ, depending on the
transceiver version.
Selects the format to display the distance and
elevation.
Speed
(Default: mph)
L
The default value may differ, depending on the
transceiver version.
Selects the format to display the speed.
Temperature
(Default: ºF)
L
The default value may differ, depending on the
transceiver version.
Selects the format to display the temperature.
Barometric
(Default: inHg)
L
The default value may differ, depending on the
transceiver version.
Selects the format to display the barometric pressure.
Rainfall
(Default: inch)
L
The default value may differ, depending on the
transceiver version.
Selects the format to display the amount of rainfall.
Wind Speed
(Default: mph)
L
The default value may differ, depending on the
transceiver version.
Selects the format to display the wind speed.
