![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549079.webp)
10-2
BASIC MANUAL
MAINTENANCE
10
10
Resetting
D
Partial reset
1.
Open the RESET screen.
»
SET > Others >
Reset
2.
Touch “Partial Reset.”
3.
Touch [YES].
L
After resetting, the default VFO mode screen is
displayed.
D
All reset
1.
Open the RESET screen.
»
SET > Others >
Reset
2.
Touch “All Reset.”
3.
Touch [NEXT].
4. After carefully reading the displayed message,
touch [YES] to perform the All reset.
L
After resetting, the default VFO mode screen is
displayed.
When you cannot enter the Set mode
If a touch screen operation error or an unexpected
operation occurs, you cannot enter the Set mode. In
this case, perform an All reset, as described below:
1.
Turn OFF the transceiver.
2. While holding down
and
, push
.
L
If you cannot turn the transceiver ON or OFF by
using
, perform an All reset by connecting
an external power source while holding down
and
.