![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549058.webp)
8-4
BASIC MANUAL
8
SET MODE
Function
» SET >
Function
Auto Repeater
(Default: ON (DUP))
L
This item is displayed in only the USA version.
The Auto repeater function automatically turns the
duplex operation and tone encoder ON or OFF.
•
OFF:
Turns OFF the function.
• ON (DUP):
Turns ON the duplex settings only.
• ON (DUP, TONE): Turns ON the duplex settings
and the tone encoder function.
RTTY Mark Frequency
(Default: 2125)
Selects the RTTY mark frequency.
L
When the internal RTTY decoder is used, 2125 Hz is
automatically selected.
RTTY Shift Width
(Default: 170)
Selects the RTTY shift width.
L
When the internal RTTY decoder is used, 170 Hz is
automatically selected.
RTTY Keying Polarity
(Default: Normal)
Selects the RTTY keying polarity.
• Normal: Key open/close = Mark/Space
• Reverse: Key open/close = Space/Mark
ATV Audio Sub Carrier Frequency
(Default: 6.5 MHz)
Sets the audio subcarrier frequency in the ATV mode.
•
OFF:
Does not receive and transmit audio signal
in the ATV mode.
•
4.5 MHz: Sets the subcarrier frequency to 4.5 MHz.
•
6.0 MHz: Sets the subcarrier frequency to 6.0 MHz.
•
6.5 MHz: Sets the subcarrier frequency to 6.5 MHz.
»
SET > Function >
SPEECH
SPEECH Language
(Default: English)
Sets the speech language to English or Japanese.
Alphabet
(Default: Normal)
Selects the type of phonetic announcement.
SPEECH Speed
(Default: Fast)
Sets the speech speed to Fast or Slow.
RX Call Sign SPEECH
(Default: ON (Kerchunk))
Turns the RX Call Sign Speech function ON or OFF
for calls received in the DV mode.
RX>CS SPEECH
(Default: ON)
Turns the RX>CS Speech function ON or OFF.
MIC Up/Down SPEECH
(Default: OFF)
Turns the Microphone Up/Down Speech function ON
or OFF.
•
OFF: The frequency or repeater call sign is not
announced.
• ON: The frequency or repeater call sign is
announced, 1 second after pushing the
microphone’s [▲]/[▼] key. In the VFO,
Memory, or Call channel mode, the frequency
is announced. When using the DR function,
the repeater call sign is announced.
S-Level SPEECH
(Default: ON)
Turns the S-meter level announcement ON or OFF.
•
OFF:
The operating mode and the operating
frequency are announced when you push
.
• ON: The signal strength level, the operating mode,
and the operating frequency are announced
when you push
.
MODE SPEECH
(Default: OFF)
Turns the operating mode announcement ON or OFF.
•
OFF:
The selected operating mode is not announced.
• ON: The selected operating mode is announced.
SPEECH Level
(Default: 50%)
Sets the Voice Synthesizer audio output level.