![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549071.webp)
8-17
BASIC MANUAL
SET MODE
8
8
Control Port (UDP) (Valid after Restart)
(Default: 50001)
Sets a port number for the control signal transfers
between the IC-905 and the remote station, when you
remotely control the IC-905.
Serial Port (UDP) (Valid after Restart)
(Default: 50002)
Sets a port number for the serial data transfers
between the IC-905 and the remote station, when you
remotely control the IC-905.
Audio Port (UDP) (Valid after Restart)
(Default: 50003)
Sets a port number for the audio signal transfers
between the IC-905 and the remote station, when you
remotely control the IC-905.
Internet Access Line (Valid after Restart)
(Default: FTTH)
Selects the Internet access line setting for the IP
remote control.
» SET > Network > Remote Settings >
Network User1
» SET > Network > Remote Settings >
Network User2
Network User1 ID
Network User2 ID
Sets a user name of up to 16 characters to use when
you remotely control the IC-905.
Network User1 Password
Network User2 Password
Sets a user password.
L
The password must include a minimum of 8 characters
and a maximum of 16 characters.
L
You cannot use a password that consists of only the
same characters.
Network User1 Administrator
(Default: NO)
Network User2 Administrator
(Default: NO)
Selects whether or not to set the user as an
administrator.
Only an authorized user can disconnect
communication between the IC-905 and the remote
station.
» SET > Network >
Remote Settings
Network Radio Name
(Default: IC-905)
Sets the IC-905’s name of up to 16 characters that is
displayed in the remote control software, when you
remotely control the IC-905.