![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549059.webp)
8-5
BASIC MANUAL
SET MODE
8
8
» SET >
Function
[SPEECH/LOCK] Switch
(Default: SPEECH/LOCK)
Selects
action.
• SPEECH/LOCK: Pushing
turns ON the Voice
Synthesizer function. Holding
down
turns the Lock function
ON or OFF.
• LOCK/SPEECH: Pushing
turns the Lock
function ON or OFF. Holding
down
turns ON the Voice
Synthesizer function.
Lock Function
(Default: MAIN DIAL)
This function electronically locks
or the
panel display* to prevent accidental changes.
* Keys and dials are also locked except for
and
.
Memo Pad Quantity
(Default: 5)
Sets the number of memo pad channels to 5 or 10.
Function of Touch for 1 sec MHz Digits
(Default: 1 MHz Step Tuning)
Selects the function when touching the MHz digits for
1 second.
• Band Stacking Register: Opens the BAND STACKING
REGISTER screen.
•
1 MHz Step Tuning:
Turns the 1 MHz Step
Tuning function ON or OFF.
MAIN DIAL Auto TS
(Default: High)
Sets the Auto Tuning Step function for
.
When rapidly rotating
, the tuning step
automatically changes according to the rotation speed.
•
OFF: Auto tuning step is turned OFF.
• Low: Approximately two times faster.
•
High: Approximately five times faster when the
tuning step is set to 1 kHz or smaller.
Approximately two times faster when the
tuning step is set to 5 kHz or larger.
MIC Up/Down Speed
(Default: Fast)
Selects the steps per second when changing
an operating frequency by holding down the
microphone’s [▲]/[▼] key.
• Slow: Low speed (25 tuning steps/second)
•
Fast: High speed (50 tuning steps/second)
AFC Limit
(Default: ON)
Selects whether or not to limit the operating range of
the Automatic Frequency Control (AFC) function.
•
OFF: Turns OFF the function.
• ON:
Limits the operating range of the AFC function.
The limit value differs, depending on the IF
filter width as shown below.
IF Filter width
AFC limit value
15 kHz
±10 kHz
10 kHz
±7 kHz
7 kHz
±5 kHz
[NOTCH] Switch (SSB)
(Default: Auto/Manual)
[NOTCH] Switch (AM)
(Default: Auto/Manual)
Selects the Notch function used in the SSB or AM mode.
• Auto:
Only the Auto Notch function can be
used.
• Manual:
Only the Manual Notch function can
be used.
• Auto/Manual: Both the Auto and Manual Notch
functions can be used.
SSB/CW Synchronous Tuning
(Default: OFF)
Turns the Displayed Frequency Shift function ON or
OFF. This function automatically shifts the frequency
to match the CW pitch when the operating mode is
toggled between SSB and CW.
•
OFF: Turns OFF the function.
• ON: When the operating mode is changed
between SSB and CW, the operating
frequency shifts by the offset amount.
CW Normal Side
(Default: USB)
Selects the carrier point in the CW normal mode.
• LSB: Sets the carrier point to the LSB side.
• USB: Sets the carrier point to the USB side.
Power OFF Setting (for Remote Control)
(Default: Shutdown only)
Selects whether or not to display the Standby/Shutdown
option dialog after holding down
for 1 second.
• Shutdown only: Shuts down the transceiver when
you turn it OFF.
• Standby/Shutdown:
Displays the Standby/Shutdown
option dialog when you turn it OFF.