![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549076.webp)
8-22
BASIC MANUAL
8
SET MODE
SD Card
» SET >
SD Card
TX/RX Picture View
Displays the pictures that are saved on the SD card.
L
The transceiver cannot display the picture while
transmitting picture data.
L
The transceiver can display up to 500 pictures.
Firmware Update
Displays the Firmware Update mode.
Firmware Update (CX-10G)
Displays the CX-10G’s Firmware Update mode.
Format
Formats the SD card.
If you use a brand new SD card, be sure to format it in
the transceiver.
Unmount
Unmounts the SD card.
Before you remove a card when the transceiver is ON,
be sure to electrically unmount it. Otherwise, the data
may be corrupted or deleted.
Others
» SET > Others >
Information
Version
Displays the transceiver firmware’s version number.
MAC Address (Controller)
Displays the controller’s MAC address.
MAC Address (RF Unit)
Displays the RF unit’s MAC address.
SERIAL NO. (Controller)
Displays the controller’s serial number.
SERIAL NO. (RF Unit)
Displays the RF unit’s serial number.
SERIAL NO. (CX-10G)
Displays the CX-10G’s serial number.
» SET > Others >
Clone
Clone Mode
Selects to enter the clone mode to read or write the
CS-905 data from or to the PC.
L
Restart the transceiver to cancel the clone mode.
» SET >
Others
Touch Screen Calibration
Touch to adjust the touch screen.
L
See the Advanced Manual for details.
» SET > Others >
Reset
Partial Reset
Resets operating settings to their default values (VFO
frequency, VFO settings, menu contents).
L
All Reset
Clears all data and returns all settings to their factory
defaults. Memory channel contents, filter setting, and
so on will all be cleared, so you will need to rewrite
your operating settings.
L