background image

8-21

BASIC MANUAL

SET MODE

8

8

Time Set

 » SET > Time Set > 

Date/Time

Date

Sets the date (Year/Month/Day).

 

L

The day of the week is automatically set.

Time

Sets the current time.

 

L

The time is displayed in the 24 hour format.

<<NTP TIME SYNC>>

Synchronizes the internal clock with the time 

management server.

 

L

To use this function, you need an Internet connection and 

default gateway settings.

NTP Function 

(Default: ON)

Automatically obtains the current time from the NTP 

server.

NTP Server Address 

(Default: time.nist.gov)

Sets NTP server address.

GPS Time Correct 

(Default: Auto)

Selects whether or not the time data is automatically 

corrected by a received GPS sentence.

 » SET > 

Time Set

UTC Offset 

(Default: ±0:00)

Sets the UTC offset time.

SD Card

 » SET > 

SD Card

Load Setting

Selects the saved data file to load.

Save Setting

Saves the setting data onto an SD card.

 » SET > SD Card > 

Import/Export

Import

Import the Memory channel contents, UR call sign, 

repeater list, or GPS memory data in the CSV format 

file.

Export

Export the Memory channel contents, UR call sign, 

repeater list, or GPS memory data in the CSV format 

file.

 » SET > SD Card > Import/Export > 

CSV Format

Separator/Decimal 

(Default: Sep [,] Dec [.])

 

L

The default value may differ, depending on the 

transceiver version.

Selects the separator and the decimal character for 

the CSV format.

 • Sep [,] Dec [.]: Separator is “,” and Decimal is “.”

 • Sep [;] Dec [.]: Separator is “;” and Decimal is “.”

 • Sep [;] Dec [,]: Separator is “;” and Decimal is “,”

Date 

(Default: mm/dd/yyyy)

 

L

The default value may differ, depending on the 

transceiver version.

Selects the date format from “yyyy/mm/dd,” “mm/dd/

yyyy,” and “dd/mm/yyyy.” (y: year, m: month, d: day)

 » SET > 

SD Card

SD Card Info

Displays the SD card capacity and the time remaining 

for voice recording.

Screen Capture View

Displays the selected screen capture.

Summary of Contents for IC-905

































































































Reviews: