![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549056.webp)
8-2
BASIC MANUAL
8
SET MODE
Function
» SET >
Function
Beep Level
(Default: 50%)
Sets the beep output level.
L
If “Beep (Confirmation)” is set to “OFF,” no beeps sound.
Beep Level Limit
(Default: ON)
Selects whether or not to limit the volume up to a
specified level.
•
OFF: Does not limit the volume level.
• ON: Limits the volume level.
Beep (Confirmation)
(Default: ON)
Turns the Confirmation beep ON or OFF.
•
OFF: Turns OFF the function for silent operation.
• ON: A beep sounds when a switch is pushed or
the touch panel is touched.
L
If “Beep Level” is set to “0%,” no beep sounds.
Home CH Beep
(Default: ON)
Turns the Home CH Beep ON or OFF.
L
In the VFO or Memory mode, when the Home Channel
frequency or the Home Channel Memory is selected, the
Home CH Beep sounds.
L
In the DR screen, when the Home Channel Access
repeater is set in FROM, the Home CH Beep sounds.
•
OFF: No beep sounds.
• ON: Sounds a beep when you select the Home
Channel.
Band Edge Beep
(Default: ON (Default))
Selects an option for the Band Edge Beep function.
•
OFF:
Turns OFF the function.
• ON (Default): A beep sounds when you tune out
of, or back into the default amateur
band’s frequency range.
• ON (User): A beep sounds when you tune out
of, or back into a user programmed
amateur band’s frequency range.
• ON (User) & TX Limit:
A beep sounds when you tune out
of, or back into a user programmed
amateur band’s frequency range.
Transmitting is inhibited outside of the
range.
L
If “Beep Level” is set to “0%,” no beep sounds.
Tone Control/TBW
» SET > Tone Control/TBW >
RX
SSB, AM, FM, DV, CW, RTTY
RX HPF/LPF
(Default: – – – – – – – – –)
Sets the cut-off frequencies for the receive audio high-
pass filter and low-pass filter, in 100 Hz steps.
L
If this item is set, the “RX Bass” and “RX Treble” items
are automatically set to “0.”
SSB, AM, FM, DV, ATV
RX Bass
(Default: 0)
RX Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
» SET > Tone Control/TBW >
TX
SSB, AM, FM, DV, ATV
TX Bass
(Default: 0)
TX Treble
(Default: 0)
Sets the bass or treble level of the transmit audio.
SSB
TBW (WIDE)
(Default: 100 – 2900)
TBW (MID)
(Default: 300 – 2700)
TBW (NAR)
(Default: 500 – 2500)
Sets the transmission passband width to wide, mid,
or narrow, by changing the lower and upper cut-off
frequencies.
SSB-D
TBW
(Default: 300 – 2700)
Sets the transmission passband width by changing
the lower and upper cut-off frequencies.
NOTE:
The default settings shown below are for the
USA transceiver version. The default settings may
differ, depending on your transceiver version.