![background image](http://html2.mh-extra.com/html/icom/ic-905/ic-905_basic-manual_4941549017.webp)
1-4
BASIC MANUAL
PANEL DESCRIPTION
1
1
Speaker microphone
Top panel/Bottom panel (RF unit)
1
[PTT] SWITCH
Hold down to transmit, release to receive.
NOTE:
To maximize the readability of your signal,
hold the microphone 5 to 10 cm (2 to 4 inches)
from your mouth, and then speak at your normal
voice level.
2
[A] KEY
Push to activate the assigned function of the [A]
key. (Default: Home CH)
[B] KEY
Push to activate the assigned function of the [B]
key. (Default: VFO/MEMO)
3
[▲]/[▼] (UP/DOWN) KEYS
z
Push to change the operating frequency or
Memory channel.
z
Hold down to continuously change the frequency
or Memory channel.
TIP:
You can change the assigned function of the
[▲], [▼], [A], and [B] keys in the following item.
» SET > Function >
Remote MIC Key
1
GPS (GNSS) ANTENNA CONNECTOR
[GPS ANT] (p. 13-5)
Attach a supplied GPS antenna.
2
140/430/1200 MHz ANTENNA CONNECTOR
[144/430/1200 MHz ANT] (p. 13-5)
Connect a 50 Ω Type N coax connector for the 144,
430, and 1200 MHz band.
3
2400 MHz ANTENNA CONNECTOR
[2400 MHz ANT] (p. 13-5)
Connect a 50 Ω Type SMA coax connector for the
2400 MHz band.
4
5600 MHz ANTENNA CONNECTOR
[5600 MHz ANT] (p. 13-5)
Connect a 50 Ω Type SMA coax connector for the
5600 MHz band.
5
CONNECTION CABLE to the CONTROLLER
Connect to the controller with a supplied cable.
6
REFERENCE SIGNAL OUTPUT
[REF OUT 10MHz/-10dBm] (p. 13-5)
Output a 10 MHz reference signal through the BNC
connector.
7
Connects to devices to control an external unit or to
control the transceiver.
2
1
3
5
7
6
4
1
2
3
Top panel
Bottom panel
Mic element