Icom IC-7300 Full Manual Download Page 140

Page: 140 / 174

15-2

UPDATING THE FIRMWARE

General

About updating the

firmware

You can update the IC-7300’s firmware using an SD

card. Updating the firmware adds new functions and

improves performance parameters.

You can download the latest firmware from the Icom

website.

http://www.icom.co.jp/world/index.html

Checking the

firmware version

You can check the firmware version in the Set mode.

Open the INFORMATION screen.

MENU

SET > Others >

Information

Touch “Version.”

•

The firmware version is displayed.

The VERSION screen

TIP:

You also can check the firmware version in the

Opening screen when you turn ON the transceiver.

Rotate

Push

The firmware version is displayed.

Previous view

Summary of Contents for IC-7300















































































































































































Search results

Summary of Contents for IC-7300

Reviews:

Related manuals for IC-7300

Brands by name

Popular brands

Icom IC-7300, Full Manual

Search results

Summary of Contents for IC-7300

Reviews:

Related manuals for IC-7300

Brands by name

Popular brands