![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249064.webp)
4
RECEIVING AND TRANSMITTING
4-30
FM repeater operation (Continued)
D
Checking the repeater input signal
You can check whether you can directly receive
another station’s transmit signal or not, by listening to
the repeater input frequency.
While receiving, hold down
XFC
to listen the repeater input
frequency.
While holding down
While holding
down
XFC
.
Release
XFC
.
Split function ON
Another station’s transmit frequency
Frequency offset
Tone squelch operation
The Tone squelch opens only when you receive a
signal that includes a matching subaudible tone in the
FM mode. You can silently wait for calls from other
stations using the same tone.
When you transmit, the tone frequency is
superimposed on your own signal.
1. Select the desired operating band.
(Example: 28 MHz)
2. Select the FM mode.
3. Rotate
MAIN DIAL
to set the operating frequency.
(Example: 29.550.00 MHz)
4. Push
FUNCTION
.
•Opens the FUNCTION screen.
5. Touch [TONE] several times to select the Tone
squelch mode.
•“TSQL” is displayed.
L
Touching [TONE] selects “TONE,” “TSQL” or OFF.
FUNCTION screen (FM mode)
6. Touch [TONE] again for 1 second.
•Opens the TONE FREQUENCY screen.
7. Rotate
MAIN DIAL
to set the tone frequency.
TONE FREQUENCY screen
Touch for 1
second to
reset to the
default.
•
Selectable tone frequencies
67.0
88.5 114.8 151.4 177.3 203.5 250.3
69.3
91.5 118.8 156.7 179.9 206.5 254.1
71.9
94.8 123.0 159.8 183.5 210.7
74.4
97.4 127.3 162.2 186.2 218.1
77.0 100.0 131.8 165.5 189.9 225.7
79.7 103.5 136.5 167.9 192.8 229.1
82.5 107.2 141.3 171.3 196.6 233.6
85.4 110.9 146.2 173.8 199.5 241.8
Checking another station’s tone frequency
You can check another station’s tone frequency by
tone scanning while the station is transmitting.
1. Touch [T-SCAN].
• The scan starts, and then stops when the matching
tone frequency as another station is received.
2. To close the TONE FREQUENCY screen, push
EXIT
.
Blinks
while
scanning
Previous view