![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249110.webp)
10
SCANS
10-6
∂
F scan and Fine
∂
F scan (VFO and Memory modes)
∂
F scan and Fine
∂
F scan
Scan
Scan
–
∂
F frequency
+
∂
F frequency
Start frequency
Jump
Repeatedly scans within the
∂
F span area.
The scan starts from the center frequency.
L
In fine scan (programmed or
∂
F), the scan speed
decreases when the squelch opens, but the
transceiver keeps scanning. The scan tuning step
changes to 10 Hz when the squelch opens.
D
∂
F scan operation
1. Push
V/M
to select the VFO or Memory mode.
2. Open the SCAN screen.
MENU
»
SCAN
3. Touch [
∂
F SPAN] several times until the desired
span is selected.
•Options: ±5 kHz, ±10 kHz, ±20 kHz, ±50 kHz,
±100 kHz, ±500 kHz, or ±1 MHz
4. Set the center frequency.
•In the VFO mode:
Rotate
MAIN DIAL
.
•In the Memory mode: Push
▲
or
▼
to select the
desired Memory channel.
5. Touch [
∂
F] to start the
∂
F scan.
Blinks
Blinks
While
∂
F scanning
L
“
∂
F SCAN” and decimal points blink while scanning.
6. Touch [
∂
F] to cancel the scan.
7. To close the SCAN screen, push
EXIT
.
D
Fine
∂
F scan operation
1. Start the
∂
F scan.
L
See steps 1 ~ 5 in “
∂
F scan operation” to the left for
details.
2. While
∂
F scanning, touch [FINE] to switch to the
File
∂
F scan.
Blinks
Blinks
While
∂
F scanning
While Fine
∂
F scanning
L
While Fine
∂
F scanning, “FINE
∂
FSCAN” blinks
instead of “
∂
F SCAN.”
L
Each time you touch [FINE], the
∂
F scan and the
Fine
∂
F scan are switched.
3. Touch [
∂
F] to cancel the scan.
4. To close the SCAN screen, push
EXIT
.
Previous view