manualshive.com logo in svg

Icom IC-7300, Full Manual

Share
Download
Icom IC-7300 Full Manual Download Page 127

12

SET MODE

12-12

Others

Version 

Displays the transceiver firmware’s version number.

Touch Screen Cmlibrmtion 

Touch to adjust the touch screen.

L

 See “Touch screen calibration function” (p. 14-3) for 

details.

Pmrtiml Reset 

Resets operating settings to their default values (VFO 

frequency, VFO settings, menu contents) without 

clearing the items below:

 •Memory channel contents

 •MY Call

 •Memory Keyer

 •RTTY memory

 •User Band Edge

 •REF Adjust

 •Fixed Edges

L

 See “Resetting” (p. 14-4) for details.

All Reset 

Clears all data and returns all settings to their factory 

defaults.

Memory channel contents, filter setting and so on 

will all be cleared, so you will need to rewrite your 

operating settings.

L

 See “Resetting” (p. 14-4) for details.

Emergency 

Sets the Emergency function.

This function enables you to use the internal antenna 

tuner in an emergency situation, but limits the 

maximum output power to 50 W.

L

 See “Emergency mode (Tuner)” (p. 11-4) for details.

MENU

 »  SET > 

Others

Previous view

Summary of Contents for IC-7300















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands