![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249121.webp)
12
SET MODE
12-6
Function (Continued)
SPEECH Level
(Default: 50%)
Sets the Voice Synthesizer audio output level.
•
Range: 0 ~ 100%
[SPEECH/LOCK] Switch
(Default: SPEECH/LOCK)
Selects
SPEECH
action.
• SPEECH/LOCK: Pushing
SPEECH
turns ON the Voice
Synthesizer function.
Holding down
SPEECH
turns the Lock
function ON or OFF.
• LOCK/SPEECH: Pushing
SPEECH
turns the Lock
function ON or OFF.
Holding down
SPEECH
turns ON the
Voice Synthesizer function.
Lock Function
(Default: MAIN DIAL)
This function electronically locks
MAIN DIAL
or
the panel display* to prevent setting changes by
accidental operation.
* Keys and dials are also locked except for
AF
RF/SQL
,
AF
RF/SQL
,
POWER
, and
SPEECH
.
•MAIN DIAL:
MAIN DIAL
is disabled.
L
MAIN DIAL
functions only when selecting
an item in the Set mode or Quick menu.
•PANEL:
The panel operation is disabled.
Memo Pmd Qumntity
(Default: 5)
Sets the number of memo pad channels.
•5: 5 channels.
•10: 10 channels.
MAIN DIAL Auto TS
(Default: High)
Sets the Auto Tuning Step function for
MAIN DIAL
.
When rapidly rotating
MAIN DIAL
, the tuning step is
automatically changed according to the rotation speed.
•OFF: Auto tuning step is turned OFF.
•LOW: Approximately 2 times faster.
•
HIGH: Approximately 5 times faster when the tuning
step is set to 1 kHz or smaller steps.
Approximately 2 times faster when the tuning
step is set to 5 kHz or larger steps.
MIC Up/Down Speed
(Default: Fast)
Sets the response speed of [
∫
]/[
√
] on the supplied
microphone while holding down.
• Slow: Slow speed (25 tuning steps/second).
• Fast: Fast speed (50 tuning steps/second).
Quick RIT/
∂
TX Clemr
(Default: OFF)
Selects the operation of
CLEAR
for the RIT and
∂
TX
functions.
•
OFF: Clears when
CLEAR
is held down for 1
second.
•
ON: Clears when
CLEAR
is pushed.
[NOTCH] Switch (SSB)
(Default: Auto/Manual)
[NOTCH] Switch (AM)
(Default: Auto/Manual)
Selects the notch function used in the SSB or AM
mode.
• Auto:
Only the Auto notch filter.
• Manual:
Only the Manual notch filter
• Auto/Manual: Both the Auto and Manual notch filters.
SSB/CW Synchronous Tuning
(Default: OFF)
Turns the Displayed Frequency Shift function ON or
OFF.
This function automatically shifts the frequency to
match the CW pitch when the operating mode is
toggled between SSB and CW.
•
OFF: Stays on the frequency even when the
operating mode is toggled between SSB and
CW.
•
ON: Shifts the frequency when the operating mode
is toggled between SSB and CW, to keep
receiving the signal.
CW Normml Side
(Default: LSB)
Selects the carrier point in the CW normal mode.
•LSB: The LSB side.
•USB: The USB side.
Previous view