![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249123.webp)
12
SET MODE
12-8
DATA OFF MOD
(Default: MIC,ACC)
Selects the connector(s) to input the modulation signal
when the data mode is OFF.
•MIC:
Uses the signal from [MIC].
•ACC:
Uses the signal from [ACC] (pin 11).
•MIC,ACC: Uses the signal from [MIC] and [ACC]
(pin 11).
•USB:
Uses the signal from [USB].
•MIC,USB: Uses the signal from [MIC] and [USB].
DATA MOD
(Default: ACC)
Selects the connector(s) to input the modulation signal
when the data mode is ON.
•MIC:
Uses the signal from [MIC].
•ACC:
Uses the signal from [ACC] (pin 11).
•MIC,ACC: Uses the signal from [MIC] and [ACC]
(pin 11).
•USB:
Uses the signal from [USB].
•MIC,USB: Uses the signal from [MIC] and [USB].
L
Touching the [DATA] key in the MODE screen
activates the data mode.
L
Automatically sets the modulation input to the
connector(s) selected in this item, for all three data
modes.
Externml Keypmd VOICE
(Default: OFF)
Enables voice memory transmission using an external
keypad.
•OFF: Turns OFF the function.
•
ON: Pushing one of the external keypad switches
transmits the content of voice memory (T1 ~
T4). (SSB/AM/FM mode)
L
Hold down the switch for 1 second to repeatedly
transmit.
Externml Keypmd KEYER
(Default: OFF)
Enables keyer memory transmission using an external
keypad.
•OFF: Turns OFF the function.
•
ON: Pushing one of the external keypad switches,
transmits the content of keyer memory (M1 ~
M4). (CW mode)
L
Hold down the switch for 1 second to repeatedly
transmit.
Externml Keypmd RTTY
(Default: OFF)
Enables RTTY memory transmission using an
external keypad.
•OFF: Turns OFF the function.
•
ON: Pushing one of the external keypad switches,
transmits the entered RTTY memory (RT1
~ RT4). (When the RTTY decode screen is
opened in the RTTY mode)
CI-V Bmud Rmte
(Default: Auto)
Selects the CI-V data transfer rate.
•
Options: 4800, 9600, 19200 (bps) or Auto
L
When “Auto” is selected, the baud rate is
automatically set according to the data rate of the
connected controller.
CI-V Address
(Default: 94h)
Selects the CI-V address.
•
Range: 02h ~ 94h ~ DFh
L
“94h” is the default address of IC-7300.
CI-V Trmnsceive
(Default: ON)
Turns the Transceive function ON or OFF.
•OFF: The status is not output.
•ON: The status is output.
When you change a setting on the
transceiver, the same change is automatically
set on other connected transceivers or
receivers, and vice versa.
CI-V USB→REMOTE Transceive Address
(Default: 00h)
Sets the address used to remotely control the
transceiver or receiver using the optional RS-BA1,
through the [USB] port.
The external equipment control signal is output from
the [REMOTE] port.
•
Range: 00h ~ DFh
TIP: When multiple devices mre connected.
The default transceive address is “00h.” To control
dedicated equipment (example IC-PW1) when several
devices are connected, set the same CI-V address.
CI-V Output (nor ANT)
(Default: OFF)
Enables outputting the antenna controller status
(frequency and so on) from the [REMOTE] port.
•OFF: Turns OFF the function.
•ON: Outputs the status.
L
Address “01h” is reserved.
The usable addresses are limited to 02h ~ DFh.
CI-V USB Port
(Default: Link to [REMOTE])
Selects the internal connection type between the
[USB] and [REMOTE] CI-V ports.
•Link to [REMOTE]:
The [USB] and [REMOTE] CI-V ports are
internally connected.
•Unlink from [REMOTE]:
The [USB] and [REMOTE] CI-V ports are not
internally connected.
Each port functions independently.
(duplex communication can be made.)
Connectors (Continued)
Previous view