![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249026.webp)
3
BASIC OPERATION
3-4
Setting the frequency
D
About the Tuning Step function
You can set the
MAIN DIAL
’s tuning step for each
operating mode. The following steps are set as
default.
•
SSB/CW/RTTY (TS OFF): 10 Hz
•
AM (TS ON):
1 kHz
•
FM (TS ON):
10 kHz
Touch the kHz digits to turn the Tuning Step function
ON or OFF.
L
The Tuning Step function's icon “▼” is displayed above
the 1 kHz digit.
D
About the 1 Hz step Fine Tuning
function
You can use the minimum tuning step of 1 Hz for fine
tuning in the SSB, CW and RTTY modes.
Touch the Hz digits for 1 second to turn the Fine
Tuning function ON or OFF.
D
Changing the Tuning Step
When the Tuning Step function is ON, you can change
the tuning steps for each operating mode.
1. Select the desired operating mode. (p. 3-3)
(Example: USB)
2.
Touch the kHz digit for 1 second.
•
The TS (SSB) screen is displayed.
The Tuning Step
function is ON.
D
Using the Main Dial
1. Select the desired operating band.
(Example: 21 MHz)
BAND STACKING REGISTER screen
2.
Rotate
MAIN DIAL
.
L
If you cannot change the frequency, make sure the
Dial Lock function is turned OFF. (p. 3-10)
L
is displayed when you set an amateur radio
frequency, and
is displayed when you set a
frequency outside the Ham band, or outside your set
Band Edges.
3.
Touch the desired tuning step.
(Example: 0.1 k)
•
The tuning step is set and returns to the previous
screen.
TS (SSB) screen
The Tuning
Step function is
ON.
L
When using the [UP]/[DN] keys on the microphone,
the frequency changes in 50 Hz steps with the Fine
Tuning function ON or OFF.
1Hz digit
•
The 1 Hz digit is displayed.
Previous view