![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249085.webp)
7
VOICE TX MEMORY OPERATION
7-2
Recording a Voice TX memory
D
Playing back
1. Do steps 1 ~ 3 as described to the left to display
the VOICE TX RECORD screen.
2. Rotate
MULTI
to select the desired Voice memory
“T1” ~ “T8,” and then push
MULTI
.
3. Push
to start the playback.
L
Playback is automatically terminated when all of the
recorded content in the memory is played back.
L
To stop while playing back, touch
.
4. To close the VOICE TX screen, push
EXIT
several
times.
You can record up to 8 Voice transmit memories of up
to 1 and a half minutes in each memory.
To transmit recorded content using a Voice TX
memory, first record the desired message, as
described below.
L
A user supplied SD card is required to use the Voice
TX memory function.
L
You can also transmit the recorded content using an
external keypad (pp. 2-2, 12-8).
D
Recording
1. Open the VOICE TX screen in a Voice mode.
L
(Voice mode: SSB, AM or FM modes).
MENU
»
VOICE
L
You can select [VOICE] on the MENU screen only
while in a Voice mode.
2. Touch [REC/SET].
• Opens the REC/SET screen.
3. Touch the “REC” item.
• Opens the VOICE TX RECORD screen.
4. Select the desired Voice memory “T1” ~ “T8.”
Touch to open
the MIC GAIN
adjustment
window
While Recording
Displays the input audio level
Adjust the Mic
gain so that the
“REC Level”
meter does not
reach 100%
5. Touch
to start recording.
Innormation
L
• You can record up to 1 and a half minutes in each
memory.
• Without holding down [PTT], speak into the
microphone at your normal voice level.
•Previously recorded content is overwritten.
6. Touch
to stop recording.
7. To close the VOICE TX screen, push
EXIT
several
times.
TIP: How to clear the recorded content
Touching the Voice memory for 1 second in step 4
above displays the Quick menu, and then touch
“Clear.”
Rotate
Push
• Opens the selected Voice memory.
Previous view