Icom IC-7300 Full Manual Download Page 4

Page: 4 / 174

iii

ABOUT THE TOUCH SCREEN

Touch operation

In the Full manual or Basic manual, the touch

operation is described as shown below.

Touch

If the display is touched briefly, one short beep

sounds.

Touch for 1 second

If the display is touched for 1 second, one

short and one long beep sound.

Touch screen precautions

• The touch screen may not properly work when the

LCD protection film or sheet is attached.

•

Touching the screen with your finger nails, sharp

topped object and so on, or touching the screen

hard may damage it.

•

Tablet PC’s operations such as flick, pinch in and

pinch out cannot be performed on this touch screen.

Touch screen maintenance

• If the touch screen becomes dusty or dirty, wipe it

clean with a soft, dry cloth.

• When you wipe the touch screen, be careful not to

push it too hard or scratch it with your finger nails.

Otherwise you may damage the screen.

A PC with the following Operating System is required.

• Microsoft

Windows

•Microsoft

Windows

8.1

•Microsoft

Windows

To read the manuals or Schematic diagram,

Adobe

Acrobat

Reader

is required. If you have

not installed it, please install the Adobe

Acrobat

Reader

on the CD or download it from Adobe

Systems Incorporated’s website.

Starting the CD

1. Insert the CD into the CD drive.

Double click “Menu.exe” on the CD.

• Depending on the PC setting, the menu screen shown

below is automatically displayed.

3. Click the desired button to open the file.

To close the Menu screen, click [Quit].

ABOUT THE SUPPLIED CD

The following items are included on the CD.

•

Full manual (English)

Instructions for full operations in English, the same

as this manual.

•

Basic manual (English)

Instructions for basic operations in English.

•

Full manual (German)

Instructions for full operations in German.

•

Basic manual (Multi-language)

Instructions for basic operations in multiple

languages.

•

Schematic diagram

Includes the schematic and block diagrams.

•

HAM radio Terms (English)

A glossary of HAM radio terms in English.

•

Adobe

Acrobat

Reader

Installer

Installer for Adobe

Acrobat

Reader

Closes the Menu screen

Installs the Adobe

Acrobat

Reader

Opens

the multi-

language

Basic manual

Opens the

Schematic

diagram

Opens the

Glossary

Opens the English

Basic manual

Opens the

German Full

manual

Opens the English Full

manual (this manual)

Different types of menu screen may be displayed,

depending on the transceiver version.

Previous view

Summary of Contents for IC-7300















































































































































































Search results

Summary of Contents for IC-7300

Reviews:

Brands by name

Popular brands

Icom IC-7300, Full Manual

Search results

Summary of Contents for IC-7300

Reviews:

Brands by name

Popular brands