Icom IC-7300 Full Manual Download Page 149

Page: 149 / 174

17-2

OPTIONS

Options

IC-PW1/IC-PW1EURO

linear

amplifier

HF/50 MHz all band 1 kW linear amplifier including an

automatic antenna tuner. An optional OPC-599 is required

for the connection.

SM-50

desktop

microphone

Dynamic microphone with

[UP]/[DOWN] switches.

HM-36

microphone

Hand microphone with

[UP]/[DOWN] switches.

SM-30

desktop

microphone

Desktop microphone

with a low frequency cut

function.

PS-126

power

supply

•Output voltage: 13.8 V DC

• Maximum output current:

25 A

SP-23

external

speaker

External speaker with high

and low frequency cut

functions.

CT-17

converter

For remote transceiver

control using a PC

equipped with an

RS-232C port.

SP-34

external

speaker

External speaker with high

and low frequency cut

functions.

AH-2b

antenna

element

A 2.5 m (8.2 ft)

long antenna

element for mobile

operation with the

AH-4.

AH-4

antenna

tuner

Automatic antenna

tuner to tune a long

wire antenna for base,

portable, or mobile

HF/50 MHz operation.

AH-740

automatic

tuning

antenna

High performance,

automatic high-speed

tuning antenna.

The optional AH-5NV

nvis

kit

is available.

•

AH-5NV

nvis

kit

Use with the AH-740.

•

AH-710

folded

dipole

antenna

Covers 2 to 30 MHz wide frequency range.

Element length:

24.5 m (80.4 ft)

Coaxial cable (supplied): 30 m (98.4 ft)

•

HM-219

microphone

The same as supplied.

•

MB-118

mounting

bracket

To mount the transceiver inside a vehicle.

•

MB-123

carrying

handle

•

OPC-420

control

cable

A 10 m (32.8 ft) shielded control cable for the AH-4.

•

OPC-599

adapter

cable

13-pin ACC connector adaptor to 7-pin + 8-pin ACC

connectors.

•

RS-BA1

remote

control

software

NOTE:

To remotely control transceivers using the

RS-BA1, BE SURE to comply with your local regulations.

•

SP-33

external

speaker

Designed for base station operation.

•

SP-35

external

speaker

Designed for mobile operation.

•

SP-38

external

speaker

Designed to match the IC-7300.

Previous view

Summary of Contents for IC-7300















































































































































































Search results

Summary of Contents for IC-7300

Reviews:

Related manuals for IC-7300

Brands by name

Popular brands

Icom IC-7300, Full Manual

Search results

Summary of Contents for IC-7300

Reviews:

Related manuals for IC-7300

Brands by name

Popular brands