![background image](http://html.mh-extra.com/html/icom/ic-7300/ic-7300_full-manual_612249055.webp)
4
RECEIVING AND TRANSMITTING
4-21
Operating CW (Continued)
D
Keyer set menu (CW-KEY SET)
In this menu, you can set the memory keyer repeat
time, dash weight, paddle specifications, key type,
and so on.
Setting example
1. Open the CW-KEY SET menu in the CW mode.
MENU
» KEYER > EDIT/SET >
CW-KEY SET
2. Select the setting item.
(Example: Side Tone Level)
3. Adjust the Side Tone Level.
(Example: 80%)
Rotate
Push
CW-KEY SET menu
4. To close the KEYER screen, push
EXIT
several
times.
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays the
Quick menu, and then touch “Default” to reset to the
default setting.
Side Tone Level
(Default: 50%)
Adjust the CW side tone output level.
• Adjust to between 0 and 100%.
Side Tone Level Limit
(Default: ON)
Turn the CW side tone level limit ON or OFF. This
disables the CW side tone when you rotate
AF
RF/SQL
(inner) above the side tone level.
Keyer Repeat time
(Default: 2sec)
Set the time between Memory keyer transmissions.
•Set to between 1 and 60 seconds.
Dot/Dash Ratio
(Default: 1:1:3.0)
Set the dot/dash ratio.
•Set to between 1:1:2.8 to 1:1:4.5 in 0.1 steps.
Keying weight example:
Morse code “K”
1 1
3
1 1 2.8
〜
4.5
Default: 1:1:3
Setting range
1:1:2.8
to
1:1:4.5
Dash
Dash
Dot
Setting range
Space
TX
RX
0
Key action
TX output
power
Set TX output power
Rise time
Time
Rise Time
(Default: 4ms)
Set the rise time of the transmitted CW envelope.
•Set to 2, 4, 6 or 8 milliseconds.
Paddle Polarity
(Default: Normal)
Set the paddle dot-dash polarity to Normal or
Reverse.
•Normal: Right
=
dash, Left = dot
•Reverse: Right
=
dot, Left = dash
Key Type
(Default: ELEC-KEY)
Set the key type for the [KEY] connector on the rear
panel.
•Set to Straight, Bug or Paddle.
MIC Up/Down Keyer
(Default: OFF)
Set the microphone [UP]/[DN] keys to use as a CW
key.
•ON:
Use the [UP]/[DN] keys as a CW key.
•OFF:
Do not use the [UP]/[DN] keys as a CW key.
L
The [UP]/[DN] keys do not work as a “squeeze key.”
L
When “ON” is selected, you cannot change the frequency
and the Memory channels using the [UP]/[DN] keys.
Previous view