![background image](http://html2.mh-extra.com/html/icom/ic-7200/ic-7200_instruction-manual_3602265082.webp)
77
10
SET MODE
■
Set mode (Continued)
PTT Tune
Tuning of the internal antenna tuner can be started auto-
matically at the moment [PTT] is pushed after the operat-
ing frequency is changed (more than 1% from last-tuned
frequency).
When an optional AT-180
antenna
tuner
is connected,
the tuner function must be turned ON in advance.
on : Tuning starts when
[PTT]
is pushed on a new frequency.
oF : Tuning starts only when
TUNER
is pushed.
OFF (default)
Modulation input (Data OFF)
Selects the desired connector(s) for modulation input
when SSB data/AM data mode is not in use.
M (MIC)
: Use the signals from [MIC].
A (ACC)
: Use the signals from [ACC] (pin11).
M A (MIC/ACC) : Use the signals from [MIC] and [ACC] (pin11).
U (USB)
: Use the signals from [USB].
MIC/ACC (default)
Modulation input (Data ON)
Selects the desired connector(s) for modulation input
when SSB data/AM data mode is in use.
M (MIC)
: Use the signals from [MIC].
A (ACC)
: Use the signals from [ACC] (pin11).
M A (MIC/ACC) : Use the signals from [MIC] and [ACC] (pin11).
U (USB)
: Use the signals from [USB].
ACC (default)
USB Level
Sets the input modulation level of the USB jack, within
0% to 100% in 1% steps.
50% (default)
Speech Level
This item adjusts the volume level for the speech function
from 0% to 100% in 1% steps.
50% (default)
Speech S-level
Signal level, frequency and mode can be announced by
the voice synthesizer. The signal level announcement
can be deactivated if desired.
When “oF” is selected, the signal level is not announced.
on : Signal level announcement
oF : No signal level announcement
ON (default)