Icom IC-7200, Instruction Manual

Page: 67 / 104

62
7
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
Memory programming
Memory channel programming can be performed
either in VFO mode or in memory mode.
D Programming in VFO mode
q
Push
V/M
➔
to select VFO mode.
w
Rotate
[DIAL]
, and push
MODE
to set the de-
sired frequency and operating mode.
e
Rotate
[M-CH]
to select the desired memory
channel.
• If the RIT control indicator lights orange, push
M-CH/RIT
SET
. (p. 61)
• “ ” appears if the selected memory channel is a
blank channel (one without any stored frequencies).
Channel decreases
Channel increases
RIT control indicator
goes out
r
Push and hold
MW
for 1 sec. to program the
displayed frequency and operating mode into the
selected memory channel.
• 3 beeps are emitted when memory programming is
successful.
[EXAMPLE]: Programming 7.088 MHz/LSB
into ch 12.
Push
VFO mode
Rotate [DIAL]
Push
Rotate [M-CH]
Push and hold
7.088 MHz/LSB are programmed into ch 12.
D Programming in memory mode
q
Push
V/M
➔
to select memory mode.
w
Rotate
[M-CH]
to select the desired memory
channel.
• If the RIT control indicator lights orange, push
M-CH/RIT
SET
. (p. 61)
• Memory channel contents appear in the display.
Channel decreases
Channel increases
RIT control indicator
goes out
e
Rotate [DIAL] , and push
MODE
to set the de-
sired frequency and operating mode.
• To program a blank channel, use direct frequency
entry with the keypad. (p. 25)
r
Push and hold
MW
for 1 sec. to program the
displayed frequency and operating mode into the
memory channel.
• 3 beeps are emitted when memory programming is
successful.
[EXAMPLE]:
Programming 21.280 MHz/USB
into ch 18.
Push
Memory mode
Rotate
[DIAL]
Push
Rotate [M-CH]
Push and hold
21.280 MHz/USB
are programmed into ch 18.