![background image](http://html2.mh-extra.com/html/icom/ic-7200/ic-7200_instruction-manual_3602265032.webp)
27
D
1 Hz and 10 Hz tuning steps
When the programmable tuning step “
Z
” disappears,
rotating
[DIAL]
changes the frequency in increments
of 1 or 10 Hz.
NOTE:
The frequency is changed in 50 Hz step
when the [UP]/[DN] switches of the microphone
are used for the frequency setting (when the pro-
grammable tuning step is not selected; “
Z
” disap-
pears.)
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
[DIAL]
➥
Push and hold
TS
for 1 sec. to toggle between
the 1 Hz and 10 Hz step settings.
• When the 1 Hz step is selected, the 1 Hz digit appears in
the frequency indication; when the 10 Hz step is selected,
the 1 Hz digit disappears from the frequency indication.
• Rotating
[DIAL]
changes the frequency in 1 Hz or
10Hz tuning step.
Push and hold
for 1 sec.
Rotating
[DIAL]
changes the
frequency in 10 Hz steps.
Rotating
[DIAL]
changes the
frequency in 1 Hz steps.
TS
Appears
10 Hz tuning
1 Hz tuning
D
TS
switch flow chart
1 Hz tuning
10 Hz tuning
Programmable step tuning
(0.1 kHz –10 kHz)
Tuning step set mode
momentarily
1 sec.
Push and hold
Push
momentarily
Push
TS
1 sec.
1 sec.
Appears
Programmable tuning step indicator
3
BASIC OPERATION