9
q
USB JACK [
]
Connect an USB cable to be used for the modula-
tion input (p. 20), the transceiver operation with PC
and the received audio import to the PC.
CAUTION:
For Windows® XP/2000:
NEVER
install the driver before connecting an
USB cable between the transceiver and PC.
For Windows Vista™:
NEVER
connect an USB cable until the driver
installation has been complete.
About the USB driver:
Icom HP (http://www.icom.co.jp/world/support/
index.html) gives the USB driver and the installa-
tion guide download service.
The following items are required:
PC
• Microsoft® Windows® XP/2000 or
Microsoft® Windows Vista™ installed
• With USB port
Other items
• USB cable (third party’s)
• PC software
About the modulation input:
Select “U” (USB) in the set mode item ‘Modulation
input (Data OFF)’ or ‘Modulation input (Data ON)’.
And the modulation input level from USB jack can
be set in the set mode item ‘USB Level.’ (p. 77)
w
EXTERNAL SPEAKER JACK [EXT SP]
(pgs. 14, 93)
Connect a 4–8
ø
external speaker, if desired.
• When an external speaker is connected, the internal
speaker does not function.
e
CI-V REMOTE CONTROL JACK [REMOTE]
(pgs. 14, 88)
➥
Designed for use with a PC for remote control of
the transceiver functions.
➥
Used for transceiver operation with another
Icom CI-V transceiver or receiver.
r
ANTENNA CONNECTOR [ANT]
(p. 13)
Accepts a 50
Ω
antenna with a PL-259 connector
and a 50
Ω
coaxial cable.
t
ALC INPUT JACK [ALC]
(p. 17)
Connects to the ALC output jack of a non-Icom lin-
ear amplifier.
y
SEND CONTROL JACK [SEND]
(p. 17)
Goes to ground while transmitting to control exter-
nal equipment such as a linear amplifier.
• Max. control level: 16 V DC/0.5 A
u
ELECTRONIC KEYER JACK [KEY]
Accepts a key or paddle connector for the internal
electronic keyer.
• The keyer type selection between the internal elec-
tronic keyer and straight key operation can be made in
set mode.
When connecting
a straight key
When connecting
a paddle
(dot)
(com)
(dash)
(
⊕
)
If you use an external electronic keyer, make
sure the output voltage of the keyer is less than
0.4 V when keying the transmitter.
DC 13.8V
ACC
KEY
SEND
ALC
ANT
REMOTE EXT SP
GND
TUNER
o
!0
!1
q
w
e
r
t
y
u
i
■
Rear panel
1
PANEL DESCRIPTION
