![background image](http://html2.mh-extra.com/html/icom/ic-7200/ic-7200_instruction-manual_3602265083.webp)
78
10
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Speech
MODE
Key
This item selects whether the operating mode an-
nounced with the speech synthesizer when
MODE
is
pushed.
When “on” is selected, the selected operating mode is
announced at pushing
MODE
.
on : Operating model announcement with
MODE
.
oF : No operating mode announcement with
MODE
.
OFF (default)
Scan Speed
This item sets the rate at which channels or frequencies
are scanned during scan operations.
High and low can be selected.
HI : Fast scan.
Lo : Slow scan.
High (default)
Scan Resume
This item turns the scan resume function ON or OFF.
on : Scan resumes 10 sec. after stopping on a signal (or
2 sec. after a signal disappears).
oF : Scan does not resume after stopping on a signal.
ON (default)
Main Dial Auto TS
This item sets the auto tuning step function. When ro-
tating [DIAL] rapidly, the tuning step rate adapts as se-
lected.
There are 2 type of auto tuning steps: HI (Fastest) and
Lo (Faster).
HI : Approx. 5 times faster when the tuning step is set to
1 kHz or smaller steps; approx. 2 times faster when
the tuning step is set to 5 kHz or larger steps.
Lo : Approx. 2 times faster
oF : Auto tuning step is turned OFF.
High (default)
Dial ¼
This item turns the ¼-speed tuning function ON or OFF
in CW, RTTY and SSB data modes.
on : The ¼-speed tuning function ON for critical tuning.
While operating in CW/RTTY/SSB data, the dial
sensitivity is reduced to ¼ of normal.
oF : The ¼-speed tuning function OFF.
NOTE:
This function is only available when the pro-
grammable tuning step is OFF (p. 26).
OFF (default)