Icom IC-7200, Instruction Manual

Page: 11 / 104

6
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
@6
MEMORY CLEAR/5/14 MHz BAND KEY
M-CL
➥
Push and hold for 1 sec. to clear the
displayed memory channel contents in
memory mode.
(p. 64)
• “ ” appears above the memory chan-
nel number.
➥
Push and hold for 1 sec., to select a
default condition or value when in set
mode/quick set mode.
(p. 70)
5
14
➥
Push
F-INP ENT
BAND
, then push this key to in-
put the number ‘5.’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec., then
push this key to select the 14 MHz band.
(p. 24)
@7
AGC/6/18 MHz BAND KEY
AGC
➥
Push to toggle the time constant for
the AGC circuit fast and slow. (p. 45)
• “ F.AGC ” appears on the display when
fast AGC is selected; no indication ap-
pears when slow AGC is selected
➥
Push and hold for 1 sec. to turn the
AGC function OFF.
• “ AGC-OFF ” appears on the display.
6
18
➥
Push
F-INP ENT
BAND
, then push this key to
input the number ‘6.’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec.,
then push this key to select the 18
MHz band. (p. 24)
@8
SPEECH COMPRESSOR/7/21 MHz BAND KEY
COMP
➥
Push to turn the speech compressor
function ON or OFF.
(p. 57)
• “ ” appears on the display.
➥
Push and hold for 1 sec. to enter the
speech compression level set mode;
push again to return to normal operation.
7
21
➥
Push
F-INP ENT
BAND
, then push this key to in-
put the number ‘7.’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec., then
push this key to select the 21 MHz band.
(p. 24)
@9
SCAN/8/24 MHz BAND KEY
SCAN
Push to start/stop the programmed/
memory scan in VFO/memory mode.
(p. 66)
• “ ” appears on the display during
scanning.
8
24
➥
Push
F-INP ENT
BAND
, then push this key to
input the number ‘8.’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec.,
then push this key to select the 24
MHz band.
(p. 24)
#0
VOX/9/28 MHz BAND KEY
VOX
➥
Push to turn the VOX function ON or
OFF. (p. 53)
➥
Push and hold for 1 sec. to enter VOX
set mode; push again to return to nor-
mal operation.
9
28
➥
Push
F-INP ENT
BAND
, then push this key to
input the number ‘9.’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec.,
then push this key to select the 28
MHz band.
(p. 24)
4
What is the VOX function?
The VOX function (Voice-Operated Transmission)
activates the transmitter when you speak into the
microphone and automatically returns to receive
when you stop speaking.
#1
MANUAL NOTCH FILTER/0/50 MHz BAND KEY
MNF
➥
Push to turn the manual notch filter func-
tion ON or OFF.
(p. 51)
• “ ” appears on the display.
➥
Push and hold for 1 sec. to enter the
manual notch set mode; push again to
return to normal operation.
(p. 52)
• Before entering the set mode, the manual
notch filter function is turned ON.
0
50
➥
Push
F-INP ENT
BAND
, then push this key to in-
put the number ‘0.’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec., then
push this key to select the 50 MHz band.
(p. 24)
#2
RIT/•/GENERAL BAND KEY
RIT
➥
Push to turn the RIT (Receiver Incremen-
tal Tuning) function ON or OFF.
(p. 44)
• “ ” appears on the display.
• RIT frequency can be adjusted with [M-CH]
control when RIT mode is selected.
➥
Push and hold for 1 sec. to add the RIT
shift frequency to the operating fre-
quency.
(p. 44)
• Available only when the XFC (transmit fre-
quency check function) is turned OFF. (p. 76)
•
GENE
➥
Push
F-INP ENT
BAND
, then push this key to in-
put the number ‘• (decimal point).’ (p. 25)
➥
Push and hold
F-INP ENT
BAND
for 1 sec., then
push this key to select the general cover-
age band.
(p. 24)
#3
FREQUENCY INPUT/ENTER/BAND KEY
F-INP ENT
BAND
➥
Push to enter the direct frequency in-
put condition. (p. 25)
➥
Push and hold for 1 sec., then push a
key on the keypad to select the oper-
ating band.
(p. 24)
•
•
GENE
selects the general coverage band.