![background image](http://html2.mh-extra.com/html/icom/ic-7200/ic-7200_instruction-manual_3602265049.webp)
5
44
FUNCTIONS FOR RECEIVE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
RIT function
The RIT (Receive Incremental Tuning) function com-
pensates for stations transmitting off-frequency or
when you prefer to listen to slightly different-sound-
ing voice characteristics, etc.
The function shifts the receive frequency up to
±9.999 kHz in 1 Hz steps (10 Hz steps when cancel-
ling the 1 Hz step readout) without moving the trans-
mit frequency.
q
Push
RIT
to turn the RIT function ON.
• “
” and the shift frequency are indicated.
- The shift frequency is indicated for approx. 1 sec.,
then returns to the operating frequency.
• The RIT control indicator lights orange.
- If the RIT control indicator does not light, push
M-CH/RIT
SET
. (See below for details)
w
Rotate the
[M-CH]
control to compensate for off-
frequency stations.
• The transmit frequency is not shifted.
• The shift frequency is indicated for about 1 sec. when
rotating the
[M-CH]
control.
e
To cancel the RIT function, push
RIT
again.
• “
” disappears.
• The RIT control indicator goes out.
About the [M-CH] control:
The
[M-CH]
control selects the memory channel
and also shifts the RIT frequency. Pushing
M-CH/RIT
SET
toggles the
[M-CH]
control as M-CH
selector or RIT controller.
RIT controller: RIT control indicator lights orange.
M-CH selector: RIT control indicator goes out.
Shifting frequency
decreases
Shifting frequency
increases
RIT control indicator
lights orange.
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
[M-CH]
Appears
• RIT monitor function
When the XFC (transmit frequency check function)
is ON (p. 76), pushing and holding
RIT
allows you
to monitor the operating frequency directly (RIT is
temporarily cancelled).
• Calculate function
The shift frequency of the RIT function can be
added/subtracted to the displayed frequency.
When the RIT function is ON, push and hold
RIT
*
for 1 sec.
• The RIT frequency is automatically reset.
* Available only when the XFC (transmit frequency check
function) is turned OFF. (p. 76)
The function shifts the receive frequency up to ±9.999
kHz in 1 Hz steps (10 Hz steps when cancelling the
1 Hz step readout) without moving the transmit fre-
quency.