![background image](http://html2.mh-extra.com/html/icom/ic-7200/ic-7200_instruction-manual_3602265076.webp)
■
Quick set mode
Mode
Set mode item
Default setting
SSB
RF POWER
100%
MIC GAIN
50%
DATA MODE
OFF
CW
RF POWER
100%
KEY SPEED
20WPM
CW PITCH
600Hz
SIDE TONE LEVEL
30%
SIDE TONE LIMIT
ON
RTTY
RF POWER
100%
TWIN PEAK FILTER
OFF
RTTY MARK TONE
2125Hz
RTTY SHIFT
170Hz
RTTY KEY POLARITY
NORMAL
AM
RF POWER
100%
MIC GAIN
50%
DATA MODE
OFF
RF power
(all modes)
This item adjusts the RF output power. The RF output
power can be adjusted from L (Low), 1% to 100% in 1%
steps.
100% (default)
Mic gain
(SSB/AM modes)
This item adjusts microphone gain from 0% to 100% in
1% steps.
50% (default)
Data mode
(SSB/AM modes)
This item turns the data mode ON or OFF.
When the data mode is turned ON, the audio input from
the [ACC] connector* is used for transmission instead of
[MIC] connector and the speech compressor function is
turned OFF.
* The desired connector can be selected. (p. 77)
on : Data mode operation is enabled.
(“ ” appears.)
oF : Data mode operation is disabled.
(“ ” disappears.)
OFF (default)
71
10
SET MODE