![background image](http://html.mh-extra.com/html/icom/ic-440n/ic-440n_instruction-manual_612150043.webp)
37
8
SELCALL (Selective Calling)
8
t
Push
or
to select the desired code.
• Select “
✱
” when Group code is set.
y
Push
SCAN
TAG
(TX Code CH) to set the selected digit.
• The editable digit to right is automatically selected to be se-
lected.
u
Repeat steps
t
and
y
to input all allowed digits.
i
After setting the last digit, push
SCAN
TAG
(TX Code CH)
to set the
code and return to the TX code channel selection mode.
o
Push
[PTT]
to transmit on the selected TX code channel,
or push
SCAN
TAG
(TX Code CH) to set the selected TX code
channel and return to the standby mode.
Appears
Transmitting
NOTE:
The TX code editable digit can only be set or
changed with the CS-440N
CLONING
SOFTWARE
.
✓
CONVENIENT!
Push
F
SET
(Function) to enter the Function mode, then push
and hold
SCAN
TAG
(Call) for 2 seconds to transmit the selected
channel’s TX code.
Appears
Transmitting
Summary of Contents for IC-440N
Page 1: ...INSTRUCTION MANUAL i440N UHF TRANSCEIVER ...
Page 56: ...Cut here ...
Page 59: ...MEMO Cut here ...
Page 60: ...MEMO ...