![background image](http://html.mh-extra.com/html/icom/ic-440n/ic-440n_instruction-manual_612150033.webp)
27
5
REPEATER OPERATION
5
Repeater operation
■
Repeaters extend the operational range of the transceiver by
re-transmitting received signals. They are usually located on
the top of hills or mountains, as the elevation increases their
effectiveness, allowing the user to transmit and receive over
greater distances. During standard operation, or simplex,
transceivers transmit and receive on the same frequency.
When operating in the Duplex mode (i.e. accessing a re-
peater), the transceiver will transmit and receive on different
frequencies. It will automatically do this when one of the re-
peater channels is selected.
Channel 36
Repeater
RPT-06
Uplink
(transmitting)
Downlink
(receiving)
Channel 6
Accessing Repeater
D
A repeater amplifi es received signals and re-transmits them
on a different frequency, allowing you to communicate over
greater distances with improved reliability. When using a re-
peater, the repeater output channel (
‘
RPT-01
’
to
‘
RPT-08
’
or
‘
RPT-41
’
to
‘
RPT-48
’
) must be selected.
You can search the accessible repeater in your local area
using the Repeater search scan function. (p. 32)
Select the desired repeater output channel (1 through 8
q
and 41 through 48). (p. 14)
Hold down
w
[PTT]
and speak into the microphone at your
normal voice level.
• “
” appears.
Appears
e
Release
[PTT]
to receive.
NOTE:
Excludes Emergency Repeater RPT-05.
4
Summary of Contents for IC-440N
Page 1: ...INSTRUCTION MANUAL i440N UHF TRANSCEIVER ...
Page 56: ...Cut here ...
Page 59: ...MEMO Cut here ...
Page 60: ...MEMO ...