Icom IC-440N, Instruction Manual

Page: 18 / 64

12
2
UNIT DESCRIPTION
Programmable function keys
■
The following functions can be assigned to
F
SET
,
MONI
T SQL
,
SCAN
TAG
,
PRIO
SET
࡮
P
O
࡮
G
࡮
P
RS
, CH
SQL
and
LOW
programmable function keys with the
CS-440N
CLONING SOFTWARE
.
The Key function activates after pushing
F
SET
, when the pro-
grammable function key is assigned to the Function mode.
Scan/Scan Tag
➥
Push to start or stop the scan.
➥
Hold down for 2 seconds to set or clear the displayed
channel as a TAG channel.
Scan Mode/Rpt Scan
➥
Push to select the scan mode.
➥
Hold down for 2 seconds to start the Repeater scan.
PRIO/PRIO Set
➥
Push to select the priority channel.
➥
Hold down for 2 seconds to set the displayed channel as
the Priority channel.
S-Ring/PRIO Clear
➥
Push to transmit the Smart-Ring call.
• When “ TSQL ” is displayed, beeps sound.
• When “ TSQL ” is not displayed, “ N/A ” appears.
➥
Hold down for 2 seconds to cancel the Priority channel
setting.
Monitor/TSQL
(This Key function can be assigned only in the Normal
mode.)
➥
Push to toggle the Monitor function ON or OFF.
➥
Hold down for 2 seconds to sequentially activate the fol-
lowing functions.
• Subaudible tone encoder and Tone squelch/DTCS squelch.
• Pocket beep.
• No tone operation.
RF Power/Lock
➥
Push to set the transmit output power level.
➥
Hold down for 2 seconds to toggle the Key lock function
ON and OFF.
TX Code CH/Call
➥
While in the CB channel operation, push to enter the TX
code channel selection mode, then push or to
select the desired channel.
➥
While in the CB channel operation, hold down for 2 sec-
onds to transmit the specifi ed SelCall TX code on the se-
lected channel.