Icom IC-440N, Instruction Manual

Page: 4 / 64

iii
PRECAUTIONS
(Continued)
DO NOT
operate the transceiver near unshielded electri-
cal blasting caps or in an explosive atmosphere.
DO NOT
operate the transceiver for extended periods
without running the vehicle’s engine. The transceiver’s power
consumption may soon exhaust the vehicles battery.
DO NOT
set the transceiver in a place without adequate
ventilation. Heat dissipation may be affected, and the trans-
ceiver may be damaged.
DO NOT
use the chemical agents such as benzine or al-
cohol when cleaning, as they can damage the transceiver’s
surfaces.
USE
Icom microphones only (supplied or optional). Other
manufacturer’s microphones have different pin assignments
and may damage the transceiver if attached.
DO NOT
modify the transceiver. The transceiver warranty
does not cover any problems caused by unauthorized modi-
fi cation.
DO NOT
use harsh solvents such as benzine or alcohol
when cleaning, as they will damage the transceiver surfaces.
DO NOT
use or place the transceiver in direct sunlight
or in areas with temperatures below –10°C or above +60°C.
The basic operations, transmission and reception of the
transceiver are guaranteed within the specifi ed operating
temperature range. However, the LCD display may not be
operate correctly, or show an indication in the case of long
hours of operation, or after being placed in extremely cold
areas.
BE CAREFUL!
The transceiver will become hot when
operating it continuously for long periods of time.
MAKE SURE
to turn OFF the transceiver power before
connecting the supplied/optional equipment.
This device complies with Standard Australia
Specifi cation No. AS/NZS 4365-2011.