41
9
OTHER FUNCTIONS
9
RX frequency
■
(for RX channels only)
The receive frequency in the RX channels can be re-pro-
grammed between 450 to 520 MHz, depending on the set-
ting.
RX channel setting
D
The RX channels do not appear on the LCD (default; “Inhibit”
setting) and cannot be selected. Therefore, the RX channels
should be set to “Enable” before programming the RX fre-
quency.
While holding down
q
SCAN
TAG
* and
LOW
*, turn ON the power
to display all pre-programmed RX channels (including the
inhibited channels.)
Select the desired channel with
w
or
, and then push
SCAN
TAG
* to set the displayed channel “Enable.”
“Inhibit” setting
“Enable” setting
e
Turn the power OFF, then ON.
• The “Enable” channels appear on the LCD, and push
CH
SQL
, then
push
or
to select the desired RX channel.
RX frequency programming
D
Select the desired RX channel (‘RX-XX’). (See to the left)
q
Push
w
F
SET
(Function) to enter the Function mode, then hold
down
F
SET
(RX VFO) for 2 seconds to enter the RX VFO
mode.
RX channel
(in Function mode)
RX VFO mode
Appears when
channel spacing
is set.
e
Push
or
several times to select the desired fre-
quency.
*Regardless of the assigned key function.
☞
Continued on the next page.
Summary of Contents for IC-440N
Page 1: ...INSTRUCTION MANUAL i440N UHF TRANSCEIVER ...
Page 56: ...Cut here ...
Page 59: ...MEMO Cut here ...
Page 60: ...MEMO ...
