Icom IC-440N Instruction Manual Download Page 15

Page: 15 / 64

UNIT DESCRIPTION

PRIO/SET•P KEY

PRIO

SET

࡮



(PRIO/PRIO Set)

Push to select the Priority channel. (p. 17)

➥

Hold down for 2 seconds to set the displayed channel

➥

as the Priority channel. (p. 17)



(S-Ring/PRIO Clear)

Push to transmit the Smart-Ring signal. (p. 40)

➥

• When “

TSQL

” is displayed, beeps sound.

• When “

TSQL

” is not displayed, “

N/A

” appears.

Hold down for 2 seconds to cancel the Priority channel

➥

setting. (p. 17)

SCAN/TAG KEY

SCAN

TAG



(Scan/Scan Tag)

Push to start or stop the scan. (pp. 30, 31)

➥

Hold down for 2 seconds to set or clear the displayed

➥

channel as TAG (scanned) channel. (p. 29)

• “

” appears when the selected channel is tagged.



(TX Code CH/Call)

Push to enter the SelCall TX code Channel Selection

➥

mode, then push

to select (CB channel op-

eration only.) (p. 35)
Hold down for 2 seconds to transmit on the SelCall TX

➥

code channel. (CB channel operation only) (p. 37)

FUNCTION DISPLAY

(p. 10)

Displays a variety of information such as an operating
channel number/name, SelCall code, selected function
and so on.

POWER KEY

(p. 14)

Hold down for 2 seconds to turn the power ON or OFF.

FUNCTION/SET KEY

SET



(Function/Set Mode)

Push to turn ON the Function mode.

➥

• “

” appears when Function mode is turned ON.

Hold down for 2 seconds to enter the Set mode. (pp.

➥

19, 20)



(Function/RX VFO)

Push to turn OFF the Function mode.

➥

• “

” disappears when the Function mode is turned OFF.

Hold down for 2 seconds to enter RX VFO mode.

➥

(‘RX-XX’ appears while an RX channel is selected)

(p. 35)

NOTE:

Automatically returns to the Normal mode after

30 seconds, when no Key operation is performed in
Function or Set mode.

MONI/T SQL KEY

MONI

T SQL



(Monitor/TSQL)

Push to turn the Monitor function ON or OFF. (p. 18)

➥

Hold down for 2 seconds to sequentially activate the

➥

following functions:

• Subaudible tone encoder and Tone squelch/DTCS squelch

(“

TSQL

” appears). (p. 34)

• Pocket beep (“

TSQL

” appears). (p. 34)

• No tone operation (“

TSQL

” disappears).



(SQL/ATS)

Push to enter the Squelch level setting mode, then

➥

push

to set the squelch level. (p. 18)

Hold down for 2 seconds to turn the ATS (Automatic

➥

Transponder System) function ON or OFF. (p. 40)

Summary of Contents for IC-440N

































































Search results

Summary of Contents for IC-440N

Reviews:

Related manuals for IC-440N

Brands by name

Popular brands

Icom IC-440N, Instruction Manual

Search results

Summary of Contents for IC-440N

Reviews:

Related manuals for IC-440N

Brands by name

Popular brands