![background image](http://html.mh-extra.com/html/icom/ic-440n/ic-440n_instruction-manual_612150037.webp)
31
6
SCAN
6
Group and Priority scan
■
Group and Priority scans repeatedly look for signal on the Pri-
ority channel while scanning specifi ed channels. This is use-
ful when waiting for a call on the Priority channel or several
specifi ed channels.
Group and Priority scans behave differently when transmit-
ting. Group scan can transmit on a Priority channel or busy
channel, and Priority scan can transmit on only a Priority
channel.
Push
q
O
G
P
RS
(Scan Mode) several times to select the Group
or Priority scan. (p. 29)
• “
” appears when the Group scan is selected, and “
”
appears when the Priority scan is selected.
Group scan is selected.
Appears
Appears
Priority scan is selected.
When the priority scan type is selected in step
w
q
, set the
Priority channel if desired. (p. 17)
•
When the Priority channel is not set, scan start channel is moni-
tored during the Priority scan.
Appears
e
Push
SCAN
TAG
(Scan)
to start the scan.
Blinks
Scan start channel
Blinks
Priority channel
Group scan starts.
Priority scan starts.
r
When receiving a signal, the scan pauses and resumes,
according to the selected Scan resume mode. (p. 30)
t
Push
SCAN
TAG
(Scan)
to cancel the scan.
Summary of Contents for IC-440N
Page 1: ...INSTRUCTION MANUAL i440N UHF TRANSCEIVER ...
Page 56: ...Cut here ...
Page 59: ...MEMO Cut here ...
Page 60: ...MEMO ...