![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020026.webp)
■
Reversed Duplex function
When the reversed duplex function is ON, the receive
frequency shifts.
(The transmit frequency shifts in normal duplex
mode.)
An example receive and transmit frequency is
shown in the table below with the following settings:
Input frequency : 145.30 MHz
Offset direction : – (Negative)
Offset frequency : 0.6 MHz
q
Push
[SET]
to enter the Set mode.
w
Push
[SET]
or
[MONI]
several times until “REV” ap-
pears.
e
Rotate
[DIAL]
to turn the reversed duplex mode ON
or OFF.
r
Push any key other than
[SET]
or
[MONI]
, to save
the selection and exit the Set mode.
Using the HM-133V
z
Push
[SET]
to enter the Set mode.
x
Push
[SET]
or
[ENT]
until “REV” appears.
c
Push
[
Y
]
or
[
Z
]
to turn the reversed duplex mode
ON or OFF.
v
Push
[CLR]
to save the selection and exit the
Set mode.
■
Auto repeater
The USA version automatically activates the repeater
settings
(DUP– or DUP+ and tone encoder ON/OFF),
when the
operating frequency falls within the general repeater
output frequency range, and deactivates them when
outside of the range.
D
Setting the Auto Repeater function ON/OFF
q
Push
[ ]
to turn OFF power.
w
While holding down
[LOCK]
(SET), hold down
[ ]
to
turn ON the power and enter the Initial Set mode.
e
Push
[SET]
until “RPT” appears as shown below.
r
Rotate
[DIAL]
to turn the Auto Repeater function to
“R1,” “R2” or “OF.”
• “OF”: Auto repeater is OFF.
• “R1”: Auto repeater is ON, tone encoder is OFF.
• “R2”: Auto repeater is ON, tone encoder is ON.
t
Push
[ ]
to exit the Initial Set mode.
Frequency range and offset direction
D
Frequency range
Duplex direction
145.200–145.495 MHz
“–” appears
146.610–146.995 MHz
147.000–147.395 MHz
“+” appears
16
Reversed
OFF
ON
Rx frequency
145.30 MHz
144.70 MHz
Tx frequency
144.70 MHz
145.30 MHz
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
The reversed duplex mode: OFF The reversed duplex mode: ON
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push
to enter the Set mode.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Auto repeater function is
turned OFF.
Auto repeater function is ON,
tone encoder is ON.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
The duplex icon blinks while the Reversed Duplex function is turned ON.
4
REPEATER OPERATION
Only USA versions