![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020027.webp)
■
General description
The transceiver has 207 memory channels including 6
scan edge memory channels (3 pairs), and 1 Call chan-
nel. These channels can be individually programmed
with:
• Operating frequency (p. 5)
• Duplex direction (p. 12) and offset (p. 15)
• Subaudible tone or tone squelch and tone frequency
(pp. 13, 39–41)
In addition, a total of 10 memory banks; A to J, are se-
lectable for use by groups, and so on.
*except for scan edge memory channels.
Programming a memory channel
■
The VFO settings, including the Set mode contents
such as subaudible tone frequency, and so on, can be
programmed into a memory channel.
q
Set the desired frequency in the VFO mode.
w
Push
[S.MW]
.
•
The
“
” icon and the memory channel number blink.
e
Rotate
[DIAL]
to select the memory channel to be
programmed.
•
If the selected channel is blank, only the memory
channel number is displayed.
r
Hold down
[MW]
(S.MW) for 1 second to program.
• 3 beeps sound.
•
The memory channel number increases, when
continuing to hold down
[MW]
(S.MW)
after pro-
gramming.
✔
CONVENIENT
Memory programming can be performed in several
ways. Example; Programming the memory channel to
the same (or different) memory channel, memory chan-
nel to the Call channel, and so on.
Using the HM-133V
z
Set the desired frequency in the VFO mode.
x
Push
[FUNC]
, and then push
[MW]
.
•
The
“
” icon and the memory channel number blink.
c
Push
[
Y
]
or
[
Z
]
to select the memory channel to be
programmed. (direct numeric input cannot be used.)
v
Push
[FUNC]
, and then hold down
[MW]
for
1 second to program.
➥
3 beeps sound and the VFO contents (including
the subaudible tone frequency, and so on.) are
programmed.
➥
The memory channel number increases, when
continuing to hold down
[MW]
after program-
ming.
17
[i.e.]:
Programming 145.870 MHz into memory chan-
nel 20 via the front panel.
[i.e.]:
Programming 145.870
MHz into the memory
channel 20, using the microphone.
5
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push
[V/MHz]
.
Rotate
[DIAL]
to set the frequency.
Push
[S.MW]
.
Rotate
[DIAL]
to select the memory channel to be programmed.
Hold down
[S.MW]
for 1 second.
Beep Beep Beep
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Beep Beep Beep
Push .
Push .
Push , and then .
Push / .
Push , and then hold down for 1 second.
MEMORY OPERATION