![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020047.webp)
37
■
Transmitting a DTMF code
Automatic transmission (DTMF memory)
D
q
Hold down
[OPT]
(BANK) for 1 second to enter the
Option Set mode.
w
If necessary, push
[SET]
or
[MONI]
to select “DTM.”
e
Rotate
[DIAL]
to turn ON the DTMF encoder.
r
Push
[BANK]
to enter the DTMF memory mode.
• The DTMF memory channel display blinks.
•
If desired, push
[BANK]
again to return to the Op-
tion Set mode.
t
Rotate
[DIAL]
to select a desired blank DTMF mem-
ory channel.
• The DTMF memory channel display blinks.
y
Push any key other than
[SET]
or
[MONI]
, to save
the selection and exit the DTMF memory mode.
• “d” appears in the 100 MHz digit.
u
Push
[PTT]
.
• The selected DTMF code is transmitted.
D
Transmitting a DTMF memory using the
HM-133V
z
Push
[FUNC]
then
[DTMF]
to turn ON the
DTMF memory encoder.
• “d” appears in the 100 MHz digit.
x
Push
[DTMF-S]
to turn ON the DTMF memory
direct selection.
•
The function LED on the microphone lights green.
c
Push a desired DTMF channel number.
•
The selected DTMF code is automatically transmit-
ted without pushing
[PTT]
.
NOTE:
When the pushed channel number is not as-
signed a DTMF code, the previously transmitted DTMF
memory code is transmitted.
v
Push
[DTMF-S]
again to turn OFF the DTMF
memory direct selection.
•
The function LED on the microphone goes out.
b
Push
[FUNC]
then
[D-OFF]
to turn OFF the
DTMF memory encoder.
D
Manual transmission using the HM-133V
z
If necessary, push
[FUNC]
then
[D-OFF]
to
turn OFF the DTMF memory encoder.
x
Push
[DTMF-S]
to turn ON the DTMF direct se-
lection.
•
The function LED on the microphone lights green.
c
Push one of A to F keys, and then push the desired
DTMF keys; 0–9 or A to F.
A:
[A]
B:
[B]
C:
[C]
D:
[D]
E:
[
M
]
F:
[#]
• Automatically transmits without pushing
[PTT]
.
•
The fi rst code entered may not be transmitted because
transmitting takes 400 milliseconds to start. Then the
DTMF code transmission starts from the 2nd code.
v
Push
[DTMF-S]
again to turn OFF the DTMF
direct selection.
•
The function LED on the microphone goes out.
[i.e.]:
Transmitting the DTMF code in the DTMF mem-
ory channel “d4.”
[i.e.]:
Transmitting the DTMF code in the DTMF mem-
ory channel “d4.”
[i.e.]:
Transmitting the DTMF code “54A2F.”
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Transmitting the DTMF code.
Rotate
[DIAL]
to turn ON the DTMF encoder, and then push
[BANK]
.
Rotate
[DIAL]
, and then push any key other than
[SET]
or
[MONI]
.
Push
[PTT]
.
Hold down
[OPT]
(BANK) for 1 second.
Beep
Beep
Beep
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push then .
Push , and then push a desired DTMF channel number.
Transmitting the DTMF code.
Beep
Beep
Beep
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push and then, sequentially push .
Transmitting the DTMF code.
Beep
Beep
Beep
9
DTMF MEMORY ENCODER