![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020022.webp)
12
3
BASIC OPERATION
■
Accessing a repeater
q
Set the receive frequency (repeater output frequen-
cy). (p. 5)
•
For only USA versions:
When the Auto Repeater function is set to “R1”
(p. 16), steps
w
and
e
are not necessary.
When the Auto Repeater function is set to “R2”
(p. 16), steps
w
to
r
are not necessary.
w
Set the frequency offset in the Set mode. (p. 15)
e
Hold down
[DUP]
(LOW) for 1 second, once or twice,
to select the minus duplex or the plus duplex mode.
•
The “–” or “+” icon appears to represent the fre-
quency offset direction.
r
Push
[TONE]
several times to turn ON the subau-
dible tone encoder, depending on the repeater re-
quirements.
•
The
“ ” icon appears
•
The 88.5 Hz tone frequency is set as the default.
But some repeaters may require a different tone
frequency to access. Refer to page 13 for setting
the tone frequency.
t
Hold down
[PTT]
to transmit.
•
The displayed frequency automatically changes to
the transmit frequency (repeater input frequency).
•
If “OFF” appears, confi rm that the frequency offset
is correctly set. (p. 15)
y
Release
[PTT]
to receive.
u
Push
[MONI]
to check whether you can directly re-
ceive the signal from the other station.
i
To return to the simplex mode, hold down
[DUP]
(LOW) for 1 second, once or twice, to clear the “–” or
“+” icon.
o
To turn OFF the subaudible tone encoder, push
[TONE]
several times until no tone icon appears.
Using the HM-133V
z
Set the receive frequency (repeater output frequen-
cy). (p. 5)
x
Set the frequency offset in the Set mode. (p. 15)
c
Push
[DUP–]
to select the minus duplex mode,
or push
[DUP+]
to select the plus duplex mode.
v
Push
[FUNC]
then
[TONE]
to turn ON the
subaudible tone encoder, depending on the repeat-
er requirements.
• Refer to page 13 for setting the tone frequency.
•
When the repeater requires a different tone sys-
tem, see page 14.
b
Hold down
[PTT]
to transmit.
n
Release
[PTT]
to receive.
m
Push
[MONI]
to check whether you can directly
receive the signal from the other station.
,
Push
[SIMP]
to return to the simplex mode.
• The “+” or “–” icon disappears.
.
To turn OFF the subaudible tone encoder, push
[FUNC]
then
[T-OFF]
.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Appears.
Push
[DUP]
(LOW)
to select the duplex mode.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Appears
Push
[TONE]
to turn ON
the subaudible tone encoder.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO
AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
While transmitting
(The displayed frequency changes to the transmit frequency)
While receiving
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push
Appears
Push ,
then .
Appears
[i.e.]:
Select the minus duplex mode, and then turn ON
the subaudible tone encoder.
[i.e.]:
Select the plus duplex mode, and then turn ON
the subaudible tone encoder.