![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020023.webp)
3
BASIC OPERATION
13
■
Subaudible tones
(Encoder function)
D
Subaudible tones
q
Select the channel that you want to set the subaudible
tone to, such as the VFO, memory or Call channel.
• The subaudible tone frequency or code is indepen-
dently programmed into each mode or channel.
w
Push
[SET]
to enter the Set mode.
e
Push
[SET]
or
[MONI]
several times until the “ ” icon
and “Ct” (for the CTCSS), the “ ” icon and “dt” (for
the DTCS) or the “ ” icon and “rt” (for the repeater
tone) appear.
r
Rotate
[DIAL]
to select the desired subaudible fre-
quency or code.
t
Push any key other than
[SET]
or
[MONI]
, to save
the entry and exit the Set mode.
NOTE:
The subaudible tone encoder frequency can be
temporarily set in a memory or Call channel. However,
when another memory channel or VFO mode is select-
ed, the set frequency is cleared. To store the tone fre-
quency permanently, overwrite the channel information.
Using the HM-133V
z
Select the mode or channel that you want to set the
subaudible tones to, such as the VFO, memory or
Call channel.
•
The subaudible tone frequency or code is indepen-
dently programmed into each mode and channel.
x
Push
[SET]
to enter the Set mode.
c
Push
[SET]
or
[ENT]
several times until the “ ”
icon and “Ct” (for the CTCSS), the “ ” icon and “dt”
(for the DTCS) or the “ ” icon and “rt” (for the re-
peater tone) appear.
v
Push
[
Y
]
or
[
Z
]
to select and set the desired subau-
dible tone frequency or code.
•
Push and hold
[
Y
]
or
[
Z
]
to sequentially change
the tones or codes.
b
Push
[CLR]
to save the entry and exit the Set
mode.
DTCS encoder (Only TX)
D
The DTCS encoder superimposes the selected DTCS
code over your transmitted signal.
q
Push
[TONE]
several times, until both “
D
” and “ ” ap-
pear.
•
The DTCS encoder activated.
w
Push
[SET]
to enter the Set mode.
e
Set the DTCS code and polarity, in the same way you
set the DTCS squelch. (p. 41)
•
You can set the DTCS transmit and receive polarity, but
the DTCS encoder affects only transmit.
r
Push any key other than
[SET]
or
[MONI]
, to save
the entry and exit the Set mode.
NOTE:
The DTCS encoder cannot be activated by us-
ing the HM-133V
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Setting the tone frequency
Setting the repeater tone frequency
Setting the DTCS code
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
• Subaudible tone frequency list
(unit: Hz)
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Appears when the DTCS encoder
is activated.