![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020063.webp)
53
11
OTHER FUNCTIONS
■
Data cloning
Cloning allows you to quickly and easily transfer the
programmed contents from one transceiver to another,
or data from a personal computer to a transceiver, us-
ing the optional CS-2300H
CLONING
SOFTWARE
.
D
Cloning between two transceivers
q
Connect the master and sub-transceivers using the
OPC-474 cloning cable through the speaker jack.
•
The master transceiver is used to send data to the
sub-transceiver.
w
Enter the cloning mode as following.
For the master transceiver:
While holding down
[M/CALL]
(PRIO), hold down
[ ]
for 1 second to turn ON the power.
For the sub-transceiver:
Hold
down
[ ]
1 second to turn ON the power.
•
“CLONE” appears and the transceivers enter the
cloning standby mode.
e
Push
[S.MW]
on the master transceiver.
•
“CL OUT” appears on the master transceiver’s dis-
play and the S/RF meter shows that data is being
transferred to the sub-transceiver.
•
“CL IN” appears on the sub-transceiver’s display
and the S/RF meter shows that data is being re-
ceived from the master transceiver.
r
When the cloning is fi nished, turn OFF both trans-
ceiver's power, and then turn ON the power again to
exit the cloning mode.
D
Cloning using a PC
Data can be transferred to and from a PC, using the
optional CS-2300H
CLONING
SOFTWARE
and OPC-478
(RS-232C type) or OPC-478UC (USB type)
CLON
-
ING
CABLE
. Consult the CS-2300H
CLONING
SOFTWARE
HELP fi le for details.
Cloning error
D
NOTE: DO NOT
push any key on the sub-transceiver
while cloning. This will cause an error.
When the display to the right appears, a cloning error
has occurred.
In this case, both transceivers automatically return to
the clone standby mode. Please follow the cloning pro-
cedures again.
PC
to the USB port
to the RS-232C port
OPC-478
OPC-478UC
or
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push
[S.MW]
to start cloning
(master transceiver).
While cloning
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
While holding down
[PRIO]
(M/CALL)
for 1 second, turn ON the power.
During cloning mode
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW