![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020025.webp)
15
REPEATER SETTING
4
■
Frequency Offset
When communicating through a repeater, the transmit
frequency is shifted up or down from the receive fre-
quency.
q
Push
[SET]
to enter the Set mode.
w
Push
[SET]
or
[MONI]
until the “±” icon and the fre-
quency offset appear.
e
Rotate
[DIAL]
to set the desired frequency offset.
•
Push
[V/MHz]
several times, to toggle the frequen-
cy step between 1 kHz and 1 MHz.
r
Push any key other than
[SET]
or
[MONI]
, to save
the selection and exit the Set mode.
Using the HM-133V
z
Push
[SET]
to enter the Set mode.
x
Hold down
[SET]
or
[ENT]
until the “±” icon
and the frequency offset appear.
c
Push
[
Y
]
or
[
Z
]
to set the desired offset.
•
The frequency cannot be directly entered using the
keypad.
v
Push
[CLR]
to save the selection and exit the
Set mode.
■
Repeater Lockout
This function helps prevent interference to other sta-
tions by inhibiting transmitting when a signal is re-
ceived. The transceiver has two inhibiting conditions,
repeater and busy.
q
Push
[ ]
to turn OFF the power.
w
While holding down
[SET]
, push
[ ]
to turn ON the
power and enter the Initial Set mode.
e
Push
[SET]
or
[MONI]
until “RLO” appears.
r
Rotate
[DIAL]
to select the Repeater Lockout func-
tion option of “RP” “BU” or “OF.”
•
“OF”:
The Repeater Lockout function is OFF.
•
“RP”:
Transmit is inhibited when a signal with an
un-matched subaudible tone is received.
•
“BU”:
Transmit is inhibited when a signal is re-
ceived.
t
Push
[ ]
to save the selection and exit the Initial Set
mode.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push to enter the Set mode,
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
The Repeater Lockout function OFF (default)
[ ]
[SET]